Search results

  1. Dr. Vette

    Season Refunded

    Interesting. We applied for and received a refund because of the Aspen Acres fire, which burned the area we were supposed to hunt. Bad times hunting in CO this year.
  2. Dr. Vette

    Annealers?

    Erik Cortina has two videos where he purposely over anneals brass. Very informative. I have purposely over annealed brass to test, and with my Bench Source, one torch on the shoulder and one mid neck, I can seemingly let it go forever without the annealing moving past even the halfway mark...
  3. Dr. Vette

    Annealers?

    That 14 second one looks like it was in way too long. I use the Bench Source, which has 2 torches, and go 4 seconds each case, give or take a little bit. Tempilaq can be hard to find, but is not difficult to use. Buy a few different temp ranges to test.
  4. Dr. Vette

    Federal fusion?

    When I have used them, the exit wounds have NOT been small. Entry wounds are caliber sized, as expected with almost any bullet. Internet reports should always be taken with a large grain of salt. ;) Give the Fusions a try.
  5. Dr. Vette

    trailer brake control

    I had to purchase an aftermarket controller when I borrowed a friend's 2019 Tahoe to pull my car trailer back and forth from MI to MN. HE had the trailering package but no controller. Yes, you can buy them like that. I thought the aftermarket one worked better than the factory ones in my 2013...
  6. Dr. Vette

    Federal fusion?

    I've used them in factory ammo, and I'm currently getting a load set up from my 6.5 CM by loading them as a component. They seem to hit WAY above their price point. Think of them as the least expensive bonded bullet you could buy. So far, on deer and antelope, they work well. I would use them...
  7. Dr. Vette

    Powder for 300 Weatherby with 180 grain bullets

    I'm aware of the other powders, some of which I own and some of which don't exist. I thought that @Alaska or @SJB358 might have Ramshot Grand specifics.
  8. Dr. Vette

    Superformance powder and the .257 Ackley Improved

    I'll throw in some info on a similar-but-different cartridge. I'm trying 140 Fusion in my 6.5 CM. The Superformance did not give me the accuracy I wanted at all, no matter what I tried. I then swapped to StaBall 6.5 and it became incredibly accurate and I gained speed. I was shocked at the...
  9. Dr. Vette

    Powder for 300 Weatherby with 180 grain bullets

    Anybody have an approximate load with Ramshot Grand? I have been trying to get "about" the same speed as I did with 7828SSC. It takes more Ramshot Grand as well as Vit 565 to get there, on a grain equivalent basis. Neither powder has "official" load data so far.
  10. Dr. Vette

    GunBroker problems and issues

    Is your cell provider blocking it as Spam?
  11. Dr. Vette

    Truck bed cap

    Same here. I'm on my 4th ARE MX in 30 years (4th truck). The extra few inches have been well worth the nominal increase in cost of the MX. I can't believe how often the extra height has been useful.
  12. Dr. Vette

    Are you a sitter or stander when reloading?

    Stand. I have a height-adjustable table, but I've never changed the height once I moved it up. To move from scale to press to rack of cartridges, I have to go side to side a bit, and I couldn't do that standing.
  13. Dr. Vette

    Won’t buy another Savage ever again

    I also upgraded the bottom metal and trigger guard, and tweaked a few other items. https://www.diproductsinc.com/Products.aspx?CAT=5628 There are LOTS of forums out there with Savage 93 rimfire tweaks to get them to feed better.
  14. Dr. Vette

    Won’t buy another Savage ever again

    I think I ended up shimming one of the parts with a small washer to get the angle correct and have it feed. Just a thought.
  15. Dr. Vette

    Won’t buy another Savage ever again

    Which model? The 93s are VERY picky with regard to screw tensions. I bedded mine, and it took forever to get the balance of screws correct and have it feed well again.
  16. Dr. Vette

    Adventure at Big Water Safari

    Are you going via Atlanta, or elsewhere? I’ve heard horror stories before regarding Newark and firearms, and we did Atlanta. @xphunter - great write up and a great time despite the firearms issues. There is nothing like an African safari.
  17. Dr. Vette

    6mm Rem 700 Varmint Special - Trial and Error

    I have a 6mm Rem in a similar vintage rifle that I received from the wife of a patient who passed away. I bedded the action, swapped out the trigger, mounted a high quality scope, and that thing shoots incredibly well with 95gr Nosler Ballistic Tips and RL-19 powder. I know that the RL-19 is...
  18. Dr. Vette

    Sorting brass by weight

    Weight sorting is a waste of time if you're going for small differences in weight. If there are large differences (grams), and you have mixed lots of the same headstamp, you might see a bit of improvement from one to the next. However, to verify you should then verify the volume of them after...
  19. Dr. Vette

    Back in the 1990's

    That looks quite nice for the age. If you have a spot where there's a chance at closer range, it would be fun to use again.
  20. Dr. Vette

    Adding Weight

    Which Ruger? I ask because if your rifle is covered in the list, I have installed a couple of the Backstop recoil pads and find them FAR better than other aftermarket pads: https://backfireshop.com/products/backstop-recoil-pad?srsltid=AfmBOorwAYeIYpG-xcVBa7gcaVZCcXgw5mtCEOhWjlfhLrqJO8vdNu-b We...
Back
Top