Search results

Could somebody run a quick load projection for me on the following: 22 ARC 62 Eld VT 2.280” coal 62K max pressure (bolt gun) 22” barrel Powders: H4895 AA2520 Thx in advance for any help you can provide. Frank

Came into 8 pds of NS Vectan 3000 that I couldn’t not buy since it was $27 a pound. All research I ve done says it’s in 8208, H4895 burn rate. Vectan says it’s a good 6 PPC powder thus thinking my 60-65 gr 6 ARC loads might be a good fit. Dr Mike or one of you guru s; would/could you run a QL...

Got a black B&C Alaskan (full aluminum bedding block) that is for a SA Howa or Vanguard. In excellent shape. Sporter barrel profile. In addition have like new Howa bottom metal, mag and follower if needed for your conversion. $225 for the stock shipped Con US $275 for stock and bottom metal...

Ordered a new Howa Superlite with 20” barrel in 7-08. Since it’s a 9.5” twist, and will be 5.5-5.75 pds with scope thinking I ll use 120 and 139/140 gr bullets to help offset some recoil. Dr Mike or one of you fine fellas, would you mind running some QL s for me with 120 prohunter and 139 Hor...

Would someone mind running a QL for me on the following data points, bullet, powder, etc. I ve been working with some mild loads with these components in a new rifle but would like to get some projections to see where I might be able to work up towards. 7-08 Rem 22” barrel 9.5 twist N550...

Got a like new, in perfect condition Oregon Gunsmithing (Wayne York) Howa Mini metal hinged bottom metal, magazine and follower for a 6ARC, 6.5 Grendel or 300 BO. $150 TYD in continental US. Cross posted so first I ll take it wins! Thx

Gentlemen, would someone be so kind to run me a QL on the following parameters: 223 Rem 60K max psi 80 gr Eldm CCI450 VV 550 powder 2.500 oal 22” barrel Thank you so much. I know VV550 is quite slow burning but since it’s a double base powder and dense it might prove useful with heavy bullets...

Would someone mind running a QL for a 6 ARC and 90 gr TGK and 95 gr TMK? Here’s specifics on latest development / components: 6 ARC - bolt gun (62000 psi max) 22” barrel 2.260” oal on both bullets Varget powder CFE 223 powder Seems like the 90-95 gr bullets offer a pretty good velocity bonus...

Would appreciate if one of you QL gurus would run me a projection based on the following. 223 Rem CFE223 powder 62,000 max psi (5.56 SAAMI) 75 gr Eldm 2.470” OAL 24” barrel, 9 twist Appreciate the help!

Dr Mike, Fotis, Scotty…. Would someone be so kind to run a QL for me on my new Howa Mini 6 ARC?? Here’s important part: 22” barrel Max PSI 62,000 K CFE223 Bullets: 108 Eldm COL 2.280 105 AMax COL 2.270 100 TGC (if available) COL 2.300 Thx in advance. I m having fun with this 4 lb 10 oz pop...

Anyone got a 6 ARC in a bolt gun? Interested in loads ( powders, bullets) you ve worked with, velocities, barrel length and cartridge OAL s. I m committed to finding / building a rifle as I ve already bought loaded ammo ( couldn’t find brass and wanted correct headstamp), have secured dies and...

Been running R26 in my 240 WB with lots of case capacity remaining. Wondered what R33 might do and how much I could get to with 100% fill. Looks like slightly north of 60 grains. Anyway, would someone be so kind to run me a QL on the following data? I m thinking this exercise might be worth...

Would someone mind running a QL for a 257 Weatherby with following data: R33 65K max 26” barrel 110 Nosler AB 110 Sierra Gamechger ( if in QL) 3.420 oal s Thx in advance. Been using R26 but landed a couple pounds of R33 so should work nicely in case.

Could someone run a QL on a 22 GT ? Don’t know if brass capacity is available but I could measure some or find a web based estimate if needed. Here’s basic info: 22 GT (necked down 6 GT) Small rifle primer 2.520 OAL 88 gr Eldm 27” barrel Would like to run for IMR4831 and R23. Go to 64000 psi...

SPF — VX-iii 4.5-14x50 LR (30mm) with Impact 32 reticle and M1 elevation turret from Leupold Custom shop $600 NOW $575 plus $20 towards freight and shipping. ( includes 30mm Sign Zee Rings; med height) $575, NOW $550 without rings SPF - VX-iii 3.5-10x40 B&C reticle and M1 dials from Leupold...

I know both of you guys load/shoot the 6.5-300 Bee… would one of you mind measuring a factory or a hand loaded neck with a bullet seated so I can use that dimension in building/sizing some brass from 300 Bee cases. I know Saami shows .295 as maximum but wondering what an actual measurement is...

Looked under bullet tests but didn’t find any tests/comparisons of the 110 gr 25 cal Gamechangers vs 110 AB and 115 BT. Specifically I ve always shot the Noslers in my 26” barreled 257 Weatherby both running at 3400 FPS +/- and curious if anyone has done any work with the GC as a comparison in...

Would someone please run a QL for me on the following data? Drew a deer tag with my cousin and he doesn’t load and hasn’t found ammo so I m gonna fire up the press! 30-06 3.380 oal 22” barrel IMR 4831 165 gr Ballistic Tip We re going with the few components available to us. Thx in advance...

Would someone be kind enough to run a QL prediction with the following components. Wanting to play with some reduced ground squirrel loads in 221 FB. I ve shot them for years in 223 with great accuracy and performance. Thx in advance. 221 Fireball 24” barrel 40 grain and 50 grain BT 1.875 oal...

I ve got a good load of 24 grs of H4895 with a 75 gr Hor hpbt for my 223 but not a lot of H4895 left and I d to keep some of it around. Would someone mind running me a QL with the following inputs; 223 2.375 oal 75 gr Hor hpbt #2279c H380 powder 24” barrel I have about 4 pounds of H380 and I...