Search results

I'd appreciate if Some of you Guys could run the Quickload data for the following : 300 Winchester Magnum Hornady 200 ELD-X bullet Norma MRP Powder Norma Brass Federal GM215 primer C.O.A.L. : 3,464" (88,00 mm.) 26" 1-11" barrel twist rate Approximate Temp. : 60°F Approx. Elevation : 2000 Ft...

Hi Folks, what is the best seating depth for the .30 cal. 180 grs. Nosler Accubond, in a .300 Win.Mag. ? So far I have tried .03" off the lands, with not so great results.... :( Maybe the poor performance does not depend on seating depth, though....and that's why I am asking the question...

I would appreciate if some of you compassionate Souls :mrgreen: could run the Quickload data for the following : 300 Winchester Magnum Berger 185 VLD Hunting Norma MRP Powder Norma Brass Federal GM215 primer C.O.A.L. : 3,57" (90,75 mm.) 26" 1-11" barrel twist rate Approximate Temp. : 60°F...

If possible, I'd need an indication for Muzzle V/0 from two loads I am currently using. Barrel is a 6,5x57 RIMMED - 24" length and 1 in 8" twist rate Load 1 : RWS Brass - Nosler Ball.Tip 120 grs bullet - CCI Br2 primers - Norma 204 powder x 46 grs. - COAL 78,60 mm. (3,09") Load 2 : RWS Brass...

If possible, I would like someone to please run QL according to the following : 300 Win.Mag. 26" barrel (1 in 11", if matters...) Norma brass Hogdgon H1000 powder Option 1 : Berger 185 VLD Hunting Option 2 : Nosler 180 Ballistic Tip Option 3 : Hornady 200 ELD-X Thank you in advance. JM (y)

Hi Gents, I am starting a "campaign" on this caliber.... :wink: ...and need to get some data to begin reloading. I have brass, powders, bullets and primers, along with Dies & Co. but I need some figures.... Got a barrel on order and hopefully it will get to me shortly.... Could you please run...

For a .222 Remington - 1 in 14" - 20" barrel length and HOGDGON H322 powder... ...Is there Anyone who can please run some data for the following bullets : - Sierra SPT 50 grs. (code 1330) - (G1 B.C. 0,222) - Nosler 55 grs. Ballistic Tip (G1 B.C. 0,267) - Hornady 52 grs. A-MAX (G1 B.C...

After considering a few options (included a new rifle…) I have come to the conclusion that the best option for my case would be to get another barrel (the third one…) for my Rifle. I’ve had this rifle for a while. It is a hunting super lightweight single shot break open, that allows barrel...

Hi Folks, does anyone have some loads for this caliber, using Viht.N160, IMR4350 or H1000 powders, with 165 and 180 grs. bullets ? OAL is "unlimited", as rounds won't be going through the mag....but single fed. Thanks JM (y)

I'd be grateful if Someone could run QL for the above caliber (Rimmed version), in a 24", 1:8" twist barrel, with Hornady 140 grs. A-MAX bullet and the following powders : - Norma 204 - Vihtavuori N550 - Vihtavuori N160 Thanks ! (y) JM

Hi Folks, how would you see this caliber performing on the big Elk ? Is there Any of you Guys who uses it ? ....what results ? I know there are better calibers out there for this type of game...but... ...if one has already a rifle chambered in 308....does it really need to upgrade or the...

Based on your experience with this caliber (and I know some of you Guys have a lot... :P ), how much do you think barrel length affects its performance to a point where it starts to perform badly ? More precisely....do you think a 26" barrel has substantial advantage over a 22" barrel ? How much...

Hi Folks, tried a search on the web for reloading data on this caliber with no luck... Is there Anyone who could help ? I think it should (still) be considered almost as a "custom" caliber... Norma doesn't probably publish the data for some kinda agreement with Blaser, I'd assume... :cry...

For long range target shooting (out to a thousand...) and occasional hunting on game up to a Whitetail, which one would you pick, and why ? What are the preferred bullet weights that should be used on each one ? I'd say 105's for 6 mm. and 140ish for 6,5.... What are the relevant velocities...

If some of you compassionate Guys would take the time to run the following data for me, I'd be grateful (y) : 308 Win. (Lapua Palma Brass) in a 26" - 1 in 12" barrel RWS Small rifle primers Powder : Vihtavuori N140 and Vihtavuori N550 Bullets : - Lapua Scenar 167 grs. - Sierra MK 168 -...

:oops: Is there Anyone who can please run this "combo" into Quickload : - Norma 200 powder + Sierra Blitzking 40 grs. bullet (#1440 - G1 B.C. 0,196) ....in a 20" barrel length. Thank you in advance for your help. :wink:

Hi Guys, I have bought the Redding resizing Die in the subject for the .300 WM and would like to gather the knowledge to properly adjust it. I've read bits here and there... If I understand correctly, this Die works with, let's say, two separate parts....one being the Die itself, resizing the...

Hi Folks, I am going to start reloading for this caliber and just bought the Dies. Redding Bushing Type "S" FULL resizer and Forster Ultra Benchrest Seater. Didn't buy the bushing yet, as a Friend of mine is going to temporarily lend me his... How do I find out the correct bushing size I...

Hi Folks, does any of you have experience on the above comparison ? How does the 129 AB LR stands against the 120 Ballistic Tip, both in Accuracy and terminal effects on game ? Is it tougher or softer ? I have been shooting BT120 in my 6,5x57R Mauser for several years with excellent results...

If so (but I doubt it....), I'd be in need of reloading data for Vihtavuori N550 powder for the following bullets : - Nosler BT 120 - Sierra 142 Match King ...to be shot in a 1 : 8" twist rate 24" barrel. Thank you in advance. Cheers. [WINKING FACE]