Search results

I was loading some 30-30 today for a friend, I do not have one, but I have the RCBS dies and they are new and only 100 rounds loaded if that. I have loaded about 25 rounds, seated the bullets but not crimped and I noticed one of the bullets had slipped back into the case where only the tip was...

I'm loading for a friends 300 WBY MAG and I've never reloaded for a WBY rifle before, its has lots of freebore and I'm trying 180 gr. Accubonds in it, need help / info on loading for this rifle, i.e. OAL for cartridge, how sentative is this cartridge to OAL , should i try to load as close to...

I have worked up loads for .30-06 using 180 gr. bullet. I used some fired brass during the process of developing the loads, so each has been fired several times. Now I've found the load that works best in this rifle. I'm going to buy new brass, same manufacture as that used to development...

Is there a prescribed method of fixing cases with neck run out of .004" or more? I have some .270 win cases that have been fired and when they were re-sized the neck run out was .004" or more.

What brand primer pocket uniformer do you use / like and why. I'm looking to something I can chuck into cordless drill motor to speed up the process.

A friend wants me to load some 180 Accubonds in his .30-06. Last year I worked up a load using 180 gr. Failsafes that was .75" @ 100 yds. He'd like to try the Accubonds because of better BC. So anybody got some good loads for it?

I'm doing some loading for a friends .270 win he bought new RCBS dies and I FL sized all the new winchester cases he bought before loading. I cleaned / polished once fired brass and sized. On a whim I ran some thru my RCBS Casemaster to check neck run out. On about 90% of the fired / sized cases...