Search results

I was unable to load 140 Partitions to the book OAL of 2.955" due to location of o-give. Just and fyi.

Would someone be able to run a quickload for a 6.5 PRC using 127 Barnes LRX, Hornady brass, CCI200 primer, 24" barrel, COAL 2.865" with H1000 and RL26?

Just looking at the nosler data, I was gonna try h1000, h4831 and rl26 first. Not in any particular order. I’m hoping to be around that 3200 fps number.

How do the thrown charges from the link compare on a beam scale?

Anyone ever use 130 accubonds outta the 6.5 prc? Mind sharing any load info?

Is it reliable? I have one that I went through the calibration with and maybe dispensed two charges just to see how it worked.

Dr. Mike- So if I am reading this right the max load for this combination for H100v would be 61.8 grains correct?

Wondering if someone could run a quick load for 257wby, 110 Accubond, 215M primer, wby case, COAL 3.209".

Just didn’t find the accuracy I was looking for everything at 100 was greater than 1.25”.

Looking for a quickload for a 300 WSM, hornady brass, fed 215M, OAL 2.82". N560, IMR 4350, H4350, RL17 for 180 Accubonds and 180TTSX bullets. Thanks.

Could I have someone with quick load run the program for 257wby 26” barrel, 215m primer, n560, and 110 accubond,115tsx, 115&120 partitions? Thanks.

Well the results with these two combos was a bust I’m sure if any creedmoor and prc shooters read this they will cringe that I literally will be seen as wasting precious rl26 that they cant find.

Thanks. 24” tube gives me a good starting point and should see a little more velocity with a 26”.

Just wondering if I could get a quickload run for the 257 WBY, RL 26, 215m primers, Norma/WBY Brass, and 110 Accubonds and 115 Partitions.

Could I get someone to run a quickload for 257 Weatherby. 115 gr Barnes TSX. Fed 215 M. Norma/Wby Brass. IMR 7828SSC. COAL 3.17". Thanks.

That’s what I was wondering! Thanks for the response b

Would anyone that has the new manual mind posting a photo of the 257 WBY data for 110 and 115 bullets?

Just so I wrap my head around it 49.02 grains is right at where 100% case capacity is correct?

Would it be possible to get someone to run some Quickload info on the 6.5Creedmoor with RL-26 and the 120gr Barnes tsx fed 210 primer and hornaday brass? Thanks.

Ok thanks for the response.