Search results

DrMike, thanks for the updates. 41

Dr.Mike

Has the program been updated to include N565 as of April 2020? 41

Understood on the new VV powder. Have 3 lbs of Reloder 33 to work with. Thank you DrMike

QL request. 338 Remington Ultra Mag - Nosler brass - Nosler 250 grain Accubond - Federal 215 primer. Rifle is a stock Model 700 with the 26" stainless barrel. Please include Vihtavuori N 565 data if possible. Thanks! 41

QL request. 338 Remington Ultra Mag - Nosler brass - Nosler 250 grain Accubond - Federal 215 primer. Rifle is a stock Model 700 with the 26" stainless barrel. Please include Vihtavuori N 565 data if possible. Thanks! 41

Any updates on this load? I'm going to try it out in my 25" rebarreled Ruger M_77 but am going to run the Nosler 160 grain Partition. Planning on working up a parallel loading using IMR 4831 as I had a trusted elk load years ago using the latter combination @ 52.0 grains with the CCI 250 primer...

The 3031 is gone, that must have been the last of it. Still have a 4350, 4198 & 4831 all IMR of the same vintage & they look and smell perfect. Some lots of older 3031 must not have the same level of endurance? 41

It was just a display of different powder types (ball, flake, short extruded ect...) on my reloading room wall. I'm assuming the cork is in that green mass, all the other powders are fine. Just the 3031 went south

Older metal can Dupont IMR 3031. Was in a display case with 5 other powders slim & tall glass bottles with cork stoppers. 41

Dwh, thank you. Much appreciated. (y)

I just have doubts about the terminal results on the Berger & LRAB. I know that Barnes will go to work. 41

We worked up to the 67.7 grain maximum book load & stopped there, we didn't match Alliants velocity claim but came close. Extraction was smooth & the Federal 215's still had very slightly rounded corners. Velocity wasn't breaking any records at 3280 fps in that Mark V lightweight 26" barrel...

Nice work. Seems the 338 RUM brass is hard to find?

Building a 338 RUM load for a hunting buddy. Starting components as follows. 250 grain Barnes LRX New Remington brass O.A.L. will be set at maximum 26" Barrel Federal 215 primer I'm thinking Allient's Reloder 33 will yield the highest velocity, but I'd like a look at the other useful...

Went 5 for 5 on a Montana deer hunt this last November. All DRT, complete pass thru out to 350 yards Barnes 130 grsin TTSX Reloder 23 New Weatherby brass Federal 215 Running the Weatherby Mark V ultra lightweight with Leupold 3.5-10X 41

Building a 338 RUM load for a hunting buddy. Starting components as follows. 250 grain Barnes LRX New Remington brass O.A.L. will be set at maximum 26" Barrel Federal 215 primer I'm thinking of starting with Allients Reloder 33, but I'd like a look at the other useful powders & estimated...

Not a target bullet, great mid speed hunting bullet thou IMO. I like the old yellow box 180 grain Mag Tip in my 20" Savage 99 .308 Win. Like to run it about 2400-2500 fps with Varget. 41

Bruce you should be able to get close, this RL26 is amazing stuff. I'm over 3250 fps with 150 grain LRAB in my 270 winchester, but with a 26" bbl 41

Dwh, thank you sir. Looks like more Reloder 26 in my future. 41