Search results

I just tried imr 4350 in my model 94 had great results so i thought I'd share. I loaded 30gr imr4350 with a 113gr cast bullet and cci primer. I was getting less then an inch group and 50 yards open sights standing. My 113gr bullet drops at .3105. I had no leading and I didn't use a gas check...

It was actually pretty easy to do. Sent from my SM-G870W using Tapatalk

Here it is this is the stages as I reformed the 375 to the 280 Sent from my SM-G870W using Tapatalk

Just found some 375 ruger brass I'll try to size some tonight and post some pics Sent from my SM-G870W using Tapatalk

I've reloaded the 300 win mag with imr 4350 and have had great success. Sent from my SM-G870W using Tapatalk

No problem I think I'll try to find some 375 ruger brass and try that also. Sent from my SM-G870W using Tapatalk

Ok so turning the belt off the 300 win is just cosmetic? I've read about 375 ruger wrecking the 280 ross dies is this something you've ever had happen? Sent from my SM-G870W using Tapatalk

So I cut one in half. It was fired once in a 300 then I sized it to 280 fired with 52gr imr 4350 then reloaded with 54gr imr 4350 and this is it. I'm not sure what I should be looking for does this look ok? Sent from my SM-G870W using Tapatalk

Here is before fire forming and after. Sent from my SM-G870W using Tapatalk

So this is from wiki it says the case compacity is 72 gr h2o Sent from my SM-G870W using Tapatalk

Thanks for the info. I'm loading at 54 grs so far and no signs of over pressure primer showing almost low pressure. This is the load data I have for it. Sent from my SM-G870W using Tapatalk

Hi I was wondering if anyone has a good load for 30-30 150 gr cast with no gas check using imr 3031? Sent from my SM-G870W using Tapatalk

Not sure if I'm German or not but I do work on some vw's every now and then haha. Do you know if dupont #10 is the same as imr 4350? Sent from my SM-G870W using Tapatalk

This is fire formed next to a 280 case Sent from my SM-G870W using Tapatalk

Sent from my SM-G870W using Tapatalk

The belted is the 300 win after sizing not fire formed yet. And the other cases are 280 ross Sent from my SM-G870W using Tapatalk

Sent from my SM-G870W using Tapatalk

Nope I keep the belt on. I used 52gr imr 4350 to fire form and the belt is pretty much the right size. The case expands to the belt size. Sent from my SM-G870W using Tapatalk

Hi I just stared loading for my m10. I reformed 300 win mag to 280 ross and that worked great. I noticed that there was some disscution on here about the 280 ross and I'm wondering if anyone has some load data using imr 4350 in the 280? Sent from my SM-G870W using Tapatalk