Search results

DrMike, Thank you very much! None of the 2 loads you show are close to a OBT node unless its very slow. No idea where to go from here

SF, Grouping is average at best, I was wondering what QL would put the pmax at so I can load up a little. I have tried AR2213sc (H4831sc) with little success. I have tried seating depths but am open to suggestions. With the powder load the depth I quoted seemed best. It approx 40thou off...

I’m not sure if this is the right spot for a request? If not please disregard. I’m having trouble getting a load that is over 3000fps (180gr) for a 300winmag and accurate. I have found an average on but its so damn slow it’s boring lol. I would love to get a time in the barrel to look for a...

I have been using Nosler Brass in my 270, not a super hot load of 59.5gr 4831sc @3080fps (24”) But after 2 firings the primer pockets are loose. 3rd firing the primer will fall out after seating it. @$105 for 50 2 firings is rubbish. I don’t mind spending money on quality items and the...

Hi mate, Yes they shot approx 2inches lower than the old design

I notice the change when i was loading for the old box design of 84.9mm (3.342) when i put the new box (fluro yellow) projectile seated is was seated deeper. the seating die seats via the ogive or a set point in the die. so if you change the design of the projectile the depth changes. cheers

Hi guys, I have gone to the new fluorescent yellow style box and the coal changed quiet a bit from the old box design. Is the new box designate the design change? The new bullet looks to be more similar to the accubond. When did this happen? The gun shops in Australia didn't even know. Cheers

Jim- that makes sense for their capacity rating. Yes I do fire then check. It increase from new to once fired by .3 or so grns capacity. Thanks for the help mate. Dr Vette- wow that's very interesting about the supplier change. I mean the cases are very consistence within the batch. Thanks...

Hi Everyone, After some help / thoughts on the following; I have been using RP brass (around 100pcs) for some time and bought a batch of Nosler for my .270 Win. (Also im in australia and the price of the Nosler brass is $115 for 50) The weights were very similar and internal capacity pretty...