Search results

Nosler 180gr AB IMR4831-65.5gr Fed 215M WW case COAL-2.880 Provided the barrel is broken in, this load should print better than 1"

I would have to say a 130gr NPT would be my choice! There isn't anything this bullet is limited to. A one load rifle is always a good thing.

You could also try seating at SAAMI max and if it isn't touching your rifling it might be the place to start. Then if it doesn't shoot from there start getting closer by 3 shot strings. You don't have to load a lot of ammo to do that!

I would seriously consider a 300WSM due to the fact that you have a .338 bore! The extra weight that you save would come in handy. I have a Kimber 8400 and it is a pleasant rifle to shoot and carry. Just my 2 cents worth.

I have owned the VX-I, VX-II, and now the VX-III. I have noticed that this 2.5-8 is the clearest thing I have ever owned. I have looked at many of the other scope companies as well and their optics are good, but for the money you can't go wrong with the VX-III! You would have to buy...

You can use the one above! Just make sure that you aren't in the rifling, which you shouldn't be.

I talked to Nosler today about the 130gr. AB for the .264 bore and they said it would be on the shelves after the first of the year!!! Thank God! They said that they would list load data for it when it is released.

What kind of accuracy should I expect with one of these in 264 WM? I haven't ever owned a Remington rifle since I started handloading. I am just curious on what to expect!

Case- WW Powder- IMR4831...65.5gr. Primer- 215M Bullet- 180 AB COAL- 2.880 Consistent sub .5 groups out of a Kimber 8400 Classic

I see that Nosler is offering loaded ammo for the 264, but do you plan on selling unloaded brass? I have been looking around for brass and can only find loaded ammo, or have to neck down 7mm RM or 338 WM brass. My father-in-law shoots the 7mm and my friend is going to be buying a 7mm, so I...

Leupold VX-III 2.5-8, Leupold mounts and rings. I also full lengthed glass bedded the action to help.

Went out yesterday and shot it again. I fired a 3 shot group, it measured 0.364 off the same bags. It was <40 degrees and the wind was around 15 MPH.

I know you want 140 loads, but I figured this group would not hurt! Case- WW Primer- 210M Powder- IMR4350- 46.0gr. Bullet- 160gr. NP 0.010 off of the lands from a M77 MKII produced a 5 shot group of .333 of an inch at 100 yards!!!

I like Federal Gold Metal Match primers. I have had the greatest consistencies and the best groups!!!

Hi, I am new to the forum as of today! Last weekend I took some new loads I worked up. Loads came from Nosler #5, Rifle Magazine Case- WW Primer- 215M (Replaced WLRM, I like the Match primers better!!!) Powder- IMR4831- 65.5gr. Bullet- 180gr. Accubond COAL- 2.880... From Rifle Magazine 3" 300...