Search results

Sent the die back to lee and they said it had wrong head spacing and has had it reduced and are sending it back. Hopefully will be reloading 270 wsm shortly.

Luckily i had 1 cartridge i didnt size prior and it fits into the chamber great, easy bolt close.

Added paper,extra lube and no change what so ever. :(

I always lube the inside the case neck, i will try the paper technique as mentioned above and i will add additional lube to the neck and will see if that helps.It is a brand new die and i cleaned it with brake clean before use.

I cam the handle as far as it will go sit for like 3 seconds. Ive done over 200 rounds of 30-06 and never encountered this problem.

No gap touches the shell holder. Very discouraged. Say i get a new die RCBS could this brass be saved?

Yes

I should state, I sized all brass with the die screwed into place touching the shell holder then 1/4 turn more. After i was done i loaded all the cases one by one into my rifle to check fitment and realized the majority did not allow the bolt handle to close.

I did this to start. I read it may need to be lower so i turned it 1/4 turn and each time still cases wouldnt chamber.

I could use some help. Only 20 out of like 110 brass i resized ended up being able to chamber in my rifle. I set the die lower and lower and lower and it did not change. What am I doing wrong? is it the die? Lee precision die and single stage press with Hornady unique case lube. I made sure not...

I have worked my way up from minimum suggested charge on Speers online reloading data and worked my way up to 57 gr but showed signs of pressure on the primers, creating nipples on them. So backed off to 56.5 an have had the best results there. I went a little longer but found 3.250 or a little...

I would do 6 of the same load with all hornady brass then all win brass etc. But still doing the same load with multiple brands of once fired etc.

I've been loading 165 gr speer hotcore at 3.250 COAL mixed brass, Ginex large rifle primers with 56.5 gr of IMR 4350 and getting 1" groups at 100 yards. Loading the 165 TTSX the same but under 55 gr of IMR4350 im getting the same results. I thought i would shoot some old factory ammo to burn it...

Im new to reloading and looking for some help creating a load for my 270 wsm weatherby vanguard I have some 150 gr Nosler ballistic tips that i would like to try, the only primers i could find were the Ginex large rifle primers and I have winchester/hornady brass. Looking at powders that are...