Search results

Range trip completed reduced POI at 100yds to 3.5 " result was 5.5 high at 200 yds 1" low at 300 yds thanks for the advice and direction

Yes I have 3" group off sand bags @ 300yds I am heading to the range tonight and lowering my 100yd point of impact to 3.5 " then shoot at 200yds and 300yds to see the difference in impact. FYI Scope mounts are tight and I only shoot three shots and rest the barrel to reduce heat. I also dry...

Ridge Runner, your spot on in yor explanation. I just needed advice from the forum and thus I will reduce my 100yd point of impact to 3 " thus 4.5" and should reduce my 200 yd to some 8 "

The lilja contour is 1 1.200" .700" .525" 2.50" 6" 27.0" 2.70 lbs. I have not chronographed the load i hand weigh each load I am unsure of the extreme rise when by all considerations it should be around 5" high but it is printing 10" I will go back out and set up on the bench and watch my...

I have had the privlage of hunting elk and other North American big game with the same bullett and load. I use a 165 nosler partition out to 400 yds. Although I do not prefer to shoot that distance the MT Goat was across the open basin and that is what I had. yes The partition got the job done...

338 lija barrel 1:10 Leupold 2.5 x10 vx111 ao set 1.5" off barrel control mounts sand bags off bench

hello... Load is 4350 IMR @ 2950 fps 200 gr accubond sighted in at 100 to be 4.5 high dead on at 300 yds. At 200 yds the bullets are printing at 10" high. Is it the trajectory or am I at fault with poor mechanics on the trigger at 100 group sub MOA 300 yds 3" group. need to understand why the...