10mm Dies
- Thread starter SJB358
- Start date
- Thread starter
- #3
- Oct 30, 2004
- 24,361
- 3,220
40 works for 10
- Thread starter
- #5
- Oct 30, 2004
- 24,361
- 3,220
Sweet what did you get Scottie a 10mm?
- Thread starter
- #8
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 6
I bought a K-Frame holster on Ebay two weeks ago, got a good price too.
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 6
That small frame in 10mm should be lively, Scotty! My Pit Bull in .40 S&W which only weighs 20 ounces bounces a little.
- Thread starter
- #11
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 6
I think that the .40's and 10mm's have alot going for them as CC protection pistols. They tend to be smaller and easier to conceal than most .45 ACP's. plus, at close range they are about the frame size of the .357 Mag but I would rather have the diameter of .40 going for me than any of the .355-.357's, no matter what their velocities. As it happens, most .357's don't go much if any faster in the 2-3 inch barrels anyhow and the .40's have a lot of diameter leverage and excellent expansion.
I just bought a set of carbide RCBS dies for it and 250 Nosler, 150 grains for way cheap! I am looking forward to loading for it. I have never loaded for an auto but I also bought some .380 dies and am going to start because Bathouse Barack has dried up the ammo and components market, again!
I just bought a set of carbide RCBS dies for it and 250 Nosler, 150 grains for way cheap! I am looking forward to loading for it. I have never loaded for an auto but I also bought some .380 dies and am going to start because Bathouse Barack has dried up the ammo and components market, again!
C.Smith
Handloader
- Oct 11, 2006
- 1,411
- 0
You will love it. I used to have one and regret getting rid of it. I got a KKM after market barrel for it so I could should lead bullets with a wide meplat.
Corey
Corey
bob_dobalina
Handloader
- Oct 6, 2009
- 344
- 50
I'm also looking for 10mm rcbs dies if anyone has some
Oldtrader3
Ammo Smith
- Nov 6, 2009
- 8,406
- 6
Corey, I can load any metplat for mine because the .40 S&W is a 2 1/2 inch revolver. That is the nice thing about it. I have purchased some IMR 4657 powder and have loaded some 150 gr Noslers for it. I will take it to the range next week.
