110 accubond / 25-06
- Thread starter Remmy
- Start date
- Nov 4, 2004
- 25,186
- 8,464
Yup, use the 115 gr load data for the 110 gr AB in your 25-06.
JD338
JD338
you're gonna love that bullet!!!
start with the 115bt data, but you can probably go well beyond max for this 110.
I'm shootin 53.5gr IMR4350, but it is hot, infact I back down to 53 for the summer months..... 53 gives me about 1" 53.5 gives .6, not enough for a coyote to give a shit about but.......
I just had a thought, I'll start another post on it, titled "bearing surface comparison"
good luck and let us know your results, good or bad it makes us all better reloaders!
start with the 115bt data, but you can probably go well beyond max for this 110.
I'm shootin 53.5gr IMR4350, but it is hot, infact I back down to 53 for the summer months..... 53 gives me about 1" 53.5 gives .6, not enough for a coyote to give a shit about but.......
I just had a thought, I'll start another post on it, titled "bearing surface comparison"
good luck and let us know your results, good or bad it makes us all better reloaders!
- Oct 30, 2004
- 24,282
- 2,998
Similar threads
