225 gr. Accubond Loads for .338 Win Mag

[Bassholebaits]

Looking for some loads for the 225 grain AccuBond for the 338 Win Mag, looking for loads using RL-22 or RL-19, but I am open to any elk load suggestions.

 

[NTM]

I use 74.5 gr of rl22 with the 225 AccuBond in my 338. Worked great on a moose last fall. Currently working up a load using rl19.

 

[Richracer1]

I'm currently using the 225gn max RL-19 load listed in the #5 manual. Shoots OK, but I'm still dialing that pain-in-the-butt Browning BOSS system.

 

[Anonymous]

In Nosler Reloading Guide #5 the most accurate load for the 225gr bullets in the 338 Win Mag was with RL19. Here is the load.
Winchester cases, Federal 215 primers.
RL19
Start: 68.5grs
Max: 72.5grs (most accurate).
As always start low and work your way up carefully.

 

[lefty315]

Using federal nickel plated brass with a COL of 3.34 inches. I have been using H4350. 68.5 grains and 70 grains of powder were the most accurate in my Winchester. Anything inbetween was not so great. My rifle is extremely picky in what it likes to shoot well.