.270 Winchester Loades

I'd start mid scale and work up with IMR 4350. If that doesn't work for you, try RL-22 or 4831.
 
Like the man said
60 gr of H 4831 or RL 22

Please work up. :!:
 
Two of my buddies use 59.5 grains of H 4831 behind the 130 Partition. Another uses 58 grains of IMR 4831 behind the same bullet. I do not see why the same load would not work behind the 130 AccuBond.
 
i have a 270 mossberg and i am using 58.5 grains of imr4831 and i am also using a 130 grain interlock from hornady and 250 large rifle magnum primers. i have shot out at about 850 yards at a coyote and dropped him in his tracks. when i went up to him and the bullet had gone right through him and about 11 inches into the ground after that. but the load is a commpressed load so just start out at about 54 grains and work your way up to 58.5 grains. if you need anything else about any gun just email me at cycleboy91@hotmail.com
 
Back
Top