.300 Win. Mag. 200 grain Accubond load

[.300winmag]

Hello all,

I've been shooting 210 Berger VLD's out of my .300 with great success; however, I have about 100 200 grain accubonds on my reloading shelf that need to go supersonic. I was hoping for some guidance on load data. I've got several powders that should produce results with this bullet including IMR4350, RL-22, Retumbo, H-1000, H4831 SC, and H4350. Anybody have any go to loads their willing to share?

 

[str8meat]

73 rl 22
78 h1000
77 retumbo

 

[SJB358]

73gr's of RL22 ran 2940 in my last 300WM. Pretty darned accurate as well. Good luck with the AB's. Those are some sleek bullets. Scotty

 

[.300winmag]

Thanks fella's. What jump have you gotten best results with. I was going to use 0.020" and play with it in 0.005" up and down if there doesn't seem to be a general consensus on where the bullet likes to be in relationship to the rifling.

 

[Elkman]

I have not loaded 200 grain bullets but the best AOL in mine with most bullets is magazine length right out to the max.

 

[FOTIS]

73 rl 22
78 h1000
77 retumbo

I agree

drop 10% to start with