Apr 5, 2014 #1 T TBASTIAN Handloader Jul 1, 2006 372 1 Looking for any pet loads you guys might have for the .300 WSM using 165 Grain Partitions or Accubonds. I'm shooting a Browning A-Bolt. Thanks for your suggestions in advance.
Looking for any pet loads you guys might have for the .300 WSM using 165 Grain Partitions or Accubonds. I'm shooting a Browning A-Bolt. Thanks for your suggestions in advance.
Apr 5, 2014 #2 wildgene Handloader Jul 4, 2011 1,597 2 ...68grs. of RL-17, this is a Max. Load!!! Work up to it... ...should chrono somewheres around 3225fps. MV. Most of my WSM/ WSSM's seem to shoot better @ Max/ Near Max velocities...
...68grs. of RL-17, this is a Max. Load!!! Work up to it... ...should chrono somewheres around 3225fps. MV. Most of my WSM/ WSSM's seem to shoot better @ Max/ Near Max velocities...
Apr 5, 2014 #3 T tecumseh Handloader Oct 20, 2010 837 1 I'm using 66gr of IMR-4350 with a 168gr Barnes TTSX in my 300 WSM. Definitely start low and work up your loads!
I'm using 66gr of IMR-4350 with a 168gr Barnes TTSX in my 300 WSM. Definitely start low and work up your loads!
Apr 9, 2014 #4 Teknys Handloader Jan 14, 2008 829 329 +1 on the RL17 and WSMs. Max book with 165AB on my son's 300WSM one buck at 225yds and one cow elk at 440yds. Both one shot and full pass thru.
+1 on the RL17 and WSMs. Max book with 165AB on my son's 300WSM one buck at 225yds and one cow elk at 440yds. Both one shot and full pass thru.
Apr 10, 2014 #5 S SJB358 Ballistician Dec 24, 2006 32,381 2,998 71 grains of RL19, CCI250, WW case and the 165AB shoots really well in my buddy's Model 70 EW.