Aussie Wanderer
Beginner
- May 5, 2022
- 140
- 249
Hi Guys,
I finally got my 7mm08 barrel threaded onto my rifle and finally got around to shooting it. Seems to go pretty nicely through the tedious run in process.
I have been using Hornady 139sst in Norma brass. Two loads stood out, 42.5 and 44 grains of Varget (AR2208 as we know it here). Barrel length is 24 inches.
I was hoping someone could give me an idea as to pressures. The cartridge base is from the 44 grain load. Looks pretty mild, no hard bolt lift or the like.
Thanks in advance.
AW
I finally got my 7mm08 barrel threaded onto my rifle and finally got around to shooting it. Seems to go pretty nicely through the tedious run in process.
I have been using Hornady 139sst in Norma brass. Two loads stood out, 42.5 and 44 grains of Varget (AR2208 as we know it here). Barrel length is 24 inches.
I was hoping someone could give me an idea as to pressures. The cartridge base is from the 44 grain load. Looks pretty mild, no hard bolt lift or the like.
Thanks in advance.
AW
Attachments
Last edited: