LRT 300 ULTRA
Beginner
- Feb 21, 2006
- 1
- 0
Looking for load data on the 200 Gr. AccuBond for various powders. Any assistance would be appreciated. :?:
Load data for 300 RUM for 200 gr. Accubond????
- Thread starter LRT 300 ULTRA
- Start date
- Oct 30, 2004
- 24,279
- 2,991
Do a search here and you will find a lot od data.
My favorite is 92 gr of RL 25 ---3150-3200 fps
94 gr Retmbo--same velocity
These are MAX so work up from like 86 grains please.
the best group the RL 25 load did was .695" at 300 yards.. see?
My favorite is 92 gr of RL 25 ---3150-3200 fps
94 gr Retmbo--same velocity
These are MAX so work up from like 86 grains please.
the best group the RL 25 load did was .695" at 300 yards.. see?
remingtonman_25_06
Handloader
- Nov 17, 2005
- 2,807
- 402
Damn pop, thats some good shooting. Factory rifle, semi custom?? My best groups with my 300 RUM (factory LSS) at 300 yards run at 1 inch. However, I might have got lucky to pull this group at 525 yards with the 200g AB. It measured 1.5" for 3 shots. My load was 94g H-1000, Fed 215 primer, 3.660", for a velocity of 3204 fps. Regularly gives .5" at 100, and 1 inch at 300 yards. A really good long range elk/bear thumper.
remingtonman_25_06
Handloader
- Nov 17, 2005
- 2,807
- 402
Forgot to mention that same load has given me quite a few 4" 3 shot groups at 800 yards as well.
- Oct 30, 2004
- 24,279
- 2,991
remingtonman_25_06":c1llypos said:
SAKO 75 SS synthetic.---totally stock
