Welcome to the forum. The 7 X 64 is a great cartridge that is woefully neglected in our day.
Did you mean to request data for the AccuBond? I'll provide these projections, using a 22 inch barrel. If you want the data in metric units, I can quickly provide the switch.
Cartridge O.A.L. L6: 3.307 inch = 84.00 mm
Barrel Length : 22.0 inch = 558.8 mm
Powder : Rottweil R904
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 102 56.50 3059 2909 68641 11984 99.2 1.001 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 102 56.50 2726 2310 47781 11205 88.0 1.177
Of course, remember to reduce your load and work up to ensure a safe load in your rifle. If you get a chance, post a picture of your rifle. All of us are addicted to good looking (and some not so good looking) rifles.
Guten Abend, welkommen sie Zum "Noslerreloading!"
What action is your rifle built on? My guess is that you could use .280 Rem data as a start point if you are built on a mauser 98 or M1917 type action. A Mannlicher straight-pull would be dicey. The geometry and ballistics are similar. Do you have access to Vihtavouri or Norma powders? Might be able to help with that as I have data for these powders in this calibre.
You might also try submitting your request to Lapua or RWS. They should have data for your cartridge om in that bullet weight.