30-06, 180 Partition, winchester model 670 H4831SC. AND
Same gun IMR 4350
I did do a search and after 9 pages didn't find any thing to my satisfaction.
Thanks
JDMAG
Cartridge : .30-06 Spring. (SAAMI)
Bullet : .308, 180, Nosler PART SP 16331
Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
Barrel Length : 24.0 inch or 609.6 mm
Powder : Hodgdon H4831 SC
Predicted data by increasing and decreasing the given charge,
incremented in steps of 1.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 107 60.00 2889 3336 67167 9709 98.7 1.100 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 107 60.00 2542 2583 45730 8918 85.5 1.303
Cartridge : .30-06 Spring. (SAAMI)
Bullet : .308, 180, Nosler PART SP 16331
Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
Barrel Length : 24.0 inch or 609.6 mm
Powder : IMR 4350
Predicted data by increasing and decreasing the given charge,
incremented in steps of 1.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge
Data for burning rate increased by 10% relative to nominal value:
+Ba 105 56.00 2934 3441 70651 9307 100.0 1.082 !DANGEROUS LOAD-DO NOT USE!
Data for burning rate decreased by 10% relative to nominal value:
-Ba 105 56.00 2645 2796 47947 9424 93.5 1.271
Cartridge : .30-06 Spring. (SAAMI)
Bullet : .308, 180, Nosler PART SP 16331
Cartridge O.A.L. L6: 3.340 inch or 84.84 mm
Barrel Length : 24.0 inch or 609.6 mm
Powder : Hodgdon H4350
Predicted data by increasing and decreasing the given charge,
incremented in steps of 1.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms