Latest activity

What's new New posts New media New media comments New profile posts Latest activity
  • JD338
    JD338 replied to the thread 308 Norma.
    Congratulations on the new rifle. If it were me I’d buy new brass. Best to start fresh with properly head stamped brass. JD338
  • DrMike
    DrMike reacted to truck driver's post in the thread 45 ACP Accuracy Load with Like Like.
    Thanks JD338, but it was not me. This is a test target fired from a Ransome pistol rest by my pistol smith. If I could shoot that good I...
  • boomer68
    boomer68 posted the thread 308 Norma in Reloading.
    Has anyone loaded for this cartridge? Just picked up an older Schultz & Larsen M65DL and was wondering if forming brass would be a good...
  • truck driver
    truck driver replied to the thread 45 ACP Accuracy Load.
    Thanks JD338, but it was not me. This is a test target fired from a Ransome pistol rest by my pistol smith. If I could shoot that good I...
  • D
    diverdown reacted to jimbires's post in the thread Copper Oxidation with Like Like.
    if you wanted to try something ; empty the tumbler of corncob , and put some sand in it . sand would be gritty and would " PROBABLY "...
  • A
    AFG270 replied to the thread Where is Spring!.
    We have a heatwave going on here in the west, yesterday's it hit 100 degrees and only cooled off to 70 overnight. Supposed to be hotter...
  • A
    AFG270 replied to the thread WTB 80s manuals.
    I have that same Lyman book from the mid 70's, but it doesn't look nice like NYDAN's. All my old loading manuals are pretty well "used".
  • J
    jimbires replied to the thread Where is Spring!.
    9* this morning . the gobblers will be wearing long Johns . ;)
  • J
    jimbires reacted to NYDAN's post in the thread WTB 80s manuals with Like Like.
    I have been at this game longer than I thought. How many of you started before me - apparently about 1980? Are these what you are...
  • J
    jimbires replied to the thread And I don't even have the rifle yet!.
    @NYDAN , I went through this too , trying to figure out how much I wanted to lengthen the throat on my grandsons 260 . all my info is...
  • A
    AFG270 reacted to jimbires's post in the thread WTB 80s manuals with Like Like.
    your Lyman book is the one that came with my reloading set up . I started reloading in 1978 at age 16 . Santa brought me the Lyman...
  • A
    AFG270 reacted to NYDAN's post in the thread WTB 80s manuals with Like Like.
    I have been at this game longer than I thought. How many of you started before me - apparently about 1980? Are these what you are...
  • A
    AFG270 reacted to SJB358's post in the thread 25 06 load with 100 grain Partitions and H4831Sc with Like Like.
    You shouldn’t have much issue working up to H4831SC in a 25-06. It’s one of the good ones. If you have some I’d give it a shot and see...
  • A
    AFG270 reacted to ElmerThud's post in the thread 25 06 load with 100 grain Partitions and H4831Sc with Like Like.
    You should try a much bigger jump to the lans. I reckon .040" touching the lans is not the best idea with Nosler bullets 100gn Partition...
  • A
    AFG270 reacted to nhenry's post in the thread 25 06 load with 100 grain Partitions and H4831Sc with Like Like.
    You might try the 4350s for 100 grainers in 25-06. 53gr of H4350 under a 100gr _______ always has worked for me.
Show older items
AMMUNITIONAmmunition BULLETSBullets BRASSBrass FirearmsFirearms GearGear
Back
Top