Latest activity

What's new New posts New media New media comments New profile posts Latest activity
  • longrangehunter
    longrangehunter replied to the thread QL request 30-06 w/ Nosler 168 gr ballistic tip.
    I've never used any of the 500 series VV powders in multiple 30'06's I've owned or have loaded for, but N150-N165 might get you the...
  • S
    skrip replied to the thread 25 06 load with 100 grain Partitions and H4831Sc.
    Thanks for the replies. Will try 0.020, then 0.030, then 0.040 jump when the snow melts. I'll also give the H4831SC a shot. I'll see...
  • DrMike
    DrMike reacted to TXbaldhunter's post in the thread 308 Norma with Like Like.
    I have two 308 Norma Magnums.I shoot them with Norma brass,but it is softer at the base than Winchester and Remington brass I've made...
  • DrMike
    DrMike reacted to JD338's post in the thread 308 Norma with Like Like.
    Congratulations on the new rifle. If it were me I’d buy new brass. Best to start fresh with properly head stamped brass. JD338
  • TXbaldhunter
    TXbaldhunter replied to the thread 308 Norma.
    Winchester Supreme 780 100.4 74.2 4.81 3035 99.4 63250 10373 1.195 ! Near Maximum ! IMR 4831...
  • TXbaldhunter
    TXbaldhunter replied to the thread 308 Norma.
    Code: Cartridge : .308 Norma Mag. Bullet : .308, 180, Nosler BalTip 30180 Useable Case Capaci: 76.003...
  • TXbaldhunter
    TXbaldhunter replied to the thread 308 Norma.
    I have two 308 Norma Magnums.I shoot them with Norma brass,but it is softer at the base than Winchester and Remington brass I've made...
    • 308 nm hart wxr.jpg
    • 308nm180.jpg
  • JD338
    JD338 replied to the thread WTB 80s manuals.
    I started reloading in 1974 JD338
  • JD338
    JD338 reacted to truck driver's post in the thread 45 ACP Accuracy Load with Like Like.
    Thanks JD338, but it was not me. This is a test target fired from a Ransome pistol rest by my pistol smith. If I could shoot that good I...
  • JD338
    JD338 replied to the thread 308 Norma.
    Congratulations on the new rifle. If it were me I’d buy new brass. Best to start fresh with properly head stamped brass. JD338
  • DrMike
    DrMike reacted to truck driver's post in the thread 45 ACP Accuracy Load with Like Like.
    Thanks JD338, but it was not me. This is a test target fired from a Ransome pistol rest by my pistol smith. If I could shoot that good I...
  • boomer68
    boomer68 posted the thread 308 Norma in Reloading.
    Has anyone loaded for this cartridge? Just picked up an older Schultz & Larsen M65DL and was wondering if forming brass would be a good...
  • truck driver
    truck driver replied to the thread 45 ACP Accuracy Load.
    Thanks JD338, but it was not me. This is a test target fired from a Ransome pistol rest by my pistol smith. If I could shoot that good I...
  • D
    diverdown reacted to jimbires's post in the thread Copper Oxidation with Like Like.
    if you wanted to try something ; empty the tumbler of corncob , and put some sand in it . sand would be gritty and would " PROBABLY "...
  • A
    AFG270 replied to the thread Where is Spring!.
    We have a heatwave going on here in the west, yesterday's it hit 100 degrees and only cooled off to 70 overnight. Supposed to be hotter...
Show older items
AMMUNITIONAmmunition BULLETSBullets BRASSBrass FirearmsFirearms GearGear
Back
Top