Latest activity
-
The 257 on a long action and a quick twist barrel eould open lots of eyes… right with a 25 Creedmoor and nipping on a 25-06 !! -
PPJGunner replied to the thread Brass selection.I don't have a 338-06AI but I do have a .375x338 Magnum wildcat that at times I had to make brass from 7MM Rem. Mag. Normally one uses...
-
PPJGunner replied to the thread 257 Roberts revisited.I tend to treat the .257 Roberts the same way I treat the 7x57 Mauser. One reason is both can do a lot better that what factory or...
-
HHeathSexton replied to the thread To anneal or not?.I anneal every firing A cordless drill A socket A propane torch A 5 Mississippi count No need to drop into water
-
Hornady and ADG make 375 Ruger brass. I did a quick search and saw a couple websites with both in stock. ADG is top quality and Hornady...
-
Blkram replied to the thread To anneal or not?.Just trying to recall the simple annealing process used by some prior to annealing machines...IIRC Place your cases in a cake pan with...
-
I started annealing when I got my first wildcat, a 6.5-270 JDJ and was cracking shoulders on fire forming about 50% of the time. I just... -
Ralt71 replied to the thread To anneal or not?.I started reloading by watching my Pap and doing it with him in the late 90's. I started reloading on my own in the early 2000's. Pap... -
Kinda old news by now. Weatherby has released their own muzzleloader based on the 307. For anyone interested here’s their web page...
-
Ralt71 replied to the thread To anneal or not?.I anneal after each firing for most of my guns and when I'm working with someone else on their loads. It makes a difference for sure...
-
I also shoot a 338-06 but not improved. I use Lapua 30-06 brass, neck it to 358 and size it down to fit snug on the first firing. No...
-
My son uses 30-06 brass necked up to 338-06. I'd recommend annealing before necking up. Will help with longer case life in regard to the...
-
Ralt71 reacted to jimbires's post in the thread How much of the neck do you bushing size? with
Like.
we all know brass moves , or we would not have to trim our cases . donuts are formed from thicker shoulder brass moving into neck... -
Thank you sir.
-
Try some Remington 40gr JSP. Our CZs like this round and we use it on squirrels.
