Latest activity
-
Char and Dolly Varden are favorites of mine. Been known to build a fire about lunch time when I was guiding in Alaska. My clients would... -
salmonchaser replied to the thread Africa 2026.That is a really good Blesbok. -
Bit of a funny story... When we arrived at the hospital after the accident, Tersa (the outfitter's wife) asked the emergency staff to...
-
salmonchaser replied to the thread Simple pleasures.Char and Dolly Varden are favorites of mine. Been known to build a fire about lunch time when I was guiding in Alaska. My clients would...
-
Blkram replied to the thread 257 Roberts revisited.I have read a couple of notes in a couple of hunting magazines, about the 257 AI (Improved) that Hornady is supposedly working on. This... -
Got everything put together and retorqued properly. Barrel is free floated all the way, grub screws at 30#, action screws at 22#, scope... -
PPJGunner replied to the thread To anneal or not?.I loaded my first rounds back in 1954. it wasn't until the mid1970s that I tired annealing my brass. One of the riflesI load for isa...
-
The 257 on a long action and a quick twist barrel eould open lots of eyes… right with a 25 Creedmoor and nipping on a 25-06 !!
-
PPJGunner replied to the thread Brass selection.I don't have a 338-06AI but I do have a .375x338 Magnum wildcat that at times I had to make brass from 7MM Rem. Mag. Normally one uses...
-
PPJGunner replied to the thread 257 Roberts revisited.I tend to treat the .257 Roberts the same way I treat the 7x57 Mauser. One reason is both can do a lot better that what factory or...
-
HHeathSexton replied to the thread To anneal or not?.I anneal every firing A cordless drill A socket A propane torch A 5 Mississippi count No need to drop into water
-
Hornady and ADG make 375 Ruger brass. I did a quick search and saw a couple websites with both in stock. ADG is top quality and Hornady...
-
Blkram replied to the thread To anneal or not?.Just trying to recall the simple annealing process used by some prior to annealing machines...IIRC Place your cases in a cake pan with...
-
I started annealing when I got my first wildcat, a 6.5-270 JDJ and was cracking shoulders on fire forming about 50% of the time. I just...
-
Ralt71 replied to the thread To anneal or not?.I started reloading by watching my Pap and doing it with him in the late 90's. I started reloading on my own in the early 2000's. Pap...
