Latest activity

  • wvbuckbuster
    wvbuckbuster reacted to Guy Miner's post in the thread Velocity and accuracy with Like Like.
    Love accuracy! And I've often found it as my loads approach or reach the published book maximum. I've seen this with the 7mm Rem Mag...
  • Ralt71
    Ralt71 replied to the thread Velocity and accuracy.
    I have noticed the same. If I back off a little from the fastest possible speed within the safe spec of the load I get a tighter group...
  • wvbuckbuster
    wvbuckbuster reacted to highoctane's post in the thread Velocity and accuracy with Like Like.
    I never had a chronograph down through the years to check my velocity due to the fact that the areas I hunt do allow for shots from...
  • Ralt71
    Ralt71 reacted to Aberhan's post in the thread Velocity and accuracy with Like Like.
    Hello, it seems most handloaders enjoy pushing the envelope when it comes to velocity, always risking more pressure for the sake of a...
  • wvbuckbuster
    wvbuckbuster reacted to Firebird24's post in the thread Velocity and accuracy with Like Like.
    Accuracy over velocity every time. BUT I will try multiple powders and brass if I can to get the most satisfying result. For example...
  • wvbuckbuster
    wvbuckbuster reacted to SJB358's post in the thread Velocity and accuracy with Like Like.
    Just me, but I use a powder that fills the case and provides adequate pressure and consistency to reduce my ES/SD numbers while paying...
  • wvbuckbuster
    wvbuckbuster reacted to Guy Miner's post in the thread Back in the 1990's with Like Like.
    We'll have to compare notes this fall during or after the season. I think my "work" is going to provide me with an inline muzzle...
  • salmonchaser
    salmonchaser replied to the thread Velocity and accuracy.
    I’m only pushing the envelope with two cartridges, the 257 Roberts and the 275 Rigby, (7x57). Both are very old cartridges loaded to...
  • JD338
    JD338 reacted to jimbires's post in the thread What would you do? with Like Like.
    I have my powder stored in cabinets , under the reloading bench , off the bench top . I try to only have my desired powder , and...
  • JD338
    JD338 reacted to michsteve's post in the thread What would you do? with Wow Wow.
    I've posted this before my one mistake was I was reloading 45/70 and was halfway thru when my powder scale started getting low so I...
  • JD338
    JD338 reacted to PJGunner's post in the thread What would you do? with Like Like.
    I never make mistrakes. PJ
  • D
    diverdown reacted to JD338's post in the thread New way to buy a gun with Like Like.
    Yup No replacement for displacement. That applies to both gun and cars/trucks. JD338
  • J
    jimbires replied to the thread What would you do?.
    I have my powder stored in cabinets , under the reloading bench , off the bench top . I try to only have my desired powder , and...
  • J
    jimbires reacted to michsteve's post in the thread What would you do? with Like Like.
    I've posted this before my one mistake was I was reloading 45/70 and was halfway thru when my powder scale started getting low so I...
  • J
    jimbires reacted to DrMike's post in the thread Accubond problems with Like Like.
    I purchased a couple of boxes when they were first released that had three or four in each box sans tips or with the tips falling out...
Back
Top