Latest activity
-
Yoteklr replied to the thread Midwest Powder MP 587.I'll let you know in about a week. Ordered some Saturday, sometimes I get very delayed shipping from them though. I do a load work up... -
SI have a Red Pad #1V in 25-06 and it loves 115gr Partitions. I got lucky and the load I put together to zero the scope shot 3 shots at...
-
SI have a reamer and dies for the 9.3x57. But when it came time to spin the rifle up. I went slightly bigger 💥. I just couldn’t help myself.
-
SHow can you not smile the whole time reading that. You have raised a great kid
-
SSJB358 replied to the thread Now that Erik is back in the states (Alabama).Great pictures Ernie and I am glad to hear the boy is in the states. Always enjoy your pics. Between Jim and you and being a young...
-
I downloaded to 65k as the barrel/bcg/extension isn't 80k rated. I have an AR in 277fury, but haven't had time to finish the build...
-
truck driver replied to the thread Pistol Primers.Flat wire springs have been around forever in machinery use but were harder to make then round wire hence the use of round wire in gun... -
GI have a reamer and dies for the 9.3x57. But when it came time to spin the rifle up. I went slightly bigger 💥. I just couldn’t help myself.
-
GIt's likely much more efficient as well considering how larger the diameter of the 9.3 is as compared to the 8x57 or 7x57 giving the...
-
GI have often wondered why there is such a marked difference in perception between the 9.3 x 57 vs the 9.3 x 62... The 62 is good for DG...
-
GI have one and have loaded for it. I’ve used 232 Normas, 270 Speers, 250 ABs and some others in my old Husky. Mine has irons sights but...
-
GI have a Red Pad #1V in 25-06 and it loves 115gr Partitions. I got lucky and the load I put together to zero the scope shot 3 shots at...
-
GI think the finicky problems with the #1 rifles was more wih the red pad guns. Those and a few early black pads had Wilson barrels until...
-
GIt's hard to say. Sometmes it'll fall in love with a particular hand load. Sometime bedding work and even slaughtering a young goat over...
-
GI must be lucky because all of my #1’s will shoot an inch or less with no modifications. Some take a little load development but they...
