Latest activity
-
WWis65x55 replied to the thread Annealers?.What temp do you prefer?
-
WI would keep the tip of the flame on the neck top of the shoulder. As for the time, that I do not know. I haven’t used a flame annealer...
-
WWis65x55 replied to the thread 6.5CM deer bullet choice.In Sweden moose have been dying to a 6.5x55 since the 1890's. The argument that the 6.5mm isn't sufficient should have been extinct many...
-
Todd NE WY reacted to cloverleaf's post in the thread Its been a while....a friend s rifle. with
Like.
Shooting a friends rifle- or more accurately hunting with it. Was able to get out for a disabled sportsmens hunt (Shoot) this past... -
Grandsons helped their Dad get a good Blacktail Buck. Handloaded 140 grain Nosler Accubond out of the 6.5 Creedmoor. Grandpa is glad to...
-
Dr. Vette replied to the thread Annealers?.That 14 second one looks like it was in way too long. I use the Bench Source, which has 2 torches, and go 4 seconds each case, give or... -
SSJB358 replied to the thread Annealers?.Hit it with Tempilaq and get it dialed in. Both cases look fine to me, but tempilaq is too easy to use and get it nailed down.
-
SI would keep the tip of the flame on the neck top of the shoulder. As for the time, that I do not know. I haven’t used a flame annealer...
-
wvbuckbuster replied to the thread AR or AR n't.Same. -
I have several, 3)223's, 6.5 Grendel, 6.5CM, and 308. All are unfired. I bought a bunch of lowers pre Obama and put a bunch together but...
-
I have shot AR platforms but just prefer the feel of a bolt action rifle. I can see the use for them and am happy for those of you who...
-
Here in the great white north, they were a restricted firearm, so we could only use it under permit at a registered gun range. We could...
-
My experience with Arken was less than desirable. When my 375 Wby destroy a EPL-4 it took forever to get any response from their... -
Grandsons helped their Dad get a good Blacktail Buck. Handloaded 140 grain Nosler Accubond out of the 6.5 Creedmoor. Grandpa is glad to...
-
Ralt71 replied to the thread Annealers?.I use and have used a Burstfire for some time now. The amount of time varies by the brass itself and to some extent the cartridge. I...
