Aussie Wanderer
Handloader
- May 5, 2022
- 393
- 936
Hi Guys,
I have a new 300wm rifle I had at the range today. I am working up some loads for it using H4831sc and would like to have an approximate on pressures. It is a 24inch barrel, federal brass, remington magnum primer. There seems to be two nodes, one at 73.0 grains and one at 74.5 grains. Interestingly neither one of these loads had the tightest sd or es, but both offered the tightest groups.
Thanks in advance
I have a new 300wm rifle I had at the range today. I am working up some loads for it using H4831sc and would like to have an approximate on pressures. It is a 24inch barrel, federal brass, remington magnum primer. There seems to be two nodes, one at 73.0 grains and one at 74.5 grains. Interestingly neither one of these loads had the tightest sd or es, but both offered the tightest groups.
Thanks in advance




