Recent content by bboswell

Reshot to confirm zero, 5 shot went ES 12 and SD 6 which is still great for a hunting gun IMO. I’m more fond of this chambering the more I mess with it. Mild recoil, good velocity, great BC & SD, what’s not to love?

Is there a legend or explanation for this chart?

We have 4 of the LRP scopes in 6.5-20 that have tracked well from 100 to 1100 for lots of shooting. I do have one rifle with an LRP in 3.5-15 that is grouping fantastic but come ups are way off from dope and I wonder if it’s not a scope issue.

]Is the advertised BC pretty close on these or no? 6.5 PRC dope is being problematic. Last 5 shot group only recorded 4 shots on the LabRadar but with ES of 4 and SD of 2 which makes me pretty confident in velocity. Shot at 375 today as that’s as long as I can get at home and it shot 1/2...

This has my interest but I don’t understand how it corrects for ES between identical loads. I load 3 shot groups in .5 increments to start, sometimes these groups have single digits ES and sometimes there will be extreme ES spreads of 20-30 fps. Seems that extreme spread between identical...

I don’t know if it’s because the bullet is off center or because it causes inconsistent neck tension but either way I believe you.

I have to turn for one rifle, it is a 280AI that I neck down 30-06 brass for and the necking down creates too much case neck thickness for my chamber.

That’s exactly what the partition is supposed to do, you never have to worry about not getting expansion with the front section and you will always get deep penetration from the back part.

Thanks. I figured that was the case, so it only provides a max load and no suggested starting load?

I am intrigued with the info that QL provides but I can never make heads or tails out of the QL’s info people post. This is a screen shot of a recent post for a combo I am in interested in. Can someone break down what it’s saying for H4831 SC? It’s just a bunch of numbers with no heading or...

My oldest son and I have been shooting deer and hogs with the 150 LRAB’s out of 280AI for 3 years. My youngest son has been using 120 BT in 7-08 for the same time. We are all switching back to Std Accubond this year due to lack of pass through and no blood trail.

So once you find your velocity node I assume you test seating depth, once you establish seating depth do you go back through charge weight?

True that!

Who’s tried it and what are your thoughts? http://www.65guys.com/10-round-load-dev ... dder-test/

Nice!