Thanks Dr. Mike.. his load is 82.0 gr sent a picture and found a link a guy posted from alliant recommending up to 85.0gr of rl17 with a 300gr partition. I wonder how rl25 or 26 would do in it..
I want to use RL 17 with my 375 H&H, my bud shared some data he has. But is not sure of pressures. His load was 82.0 grs with RL17, anyone out their reading this please don't go out running and use this data. He said it shot fine and very accurate load. So if anyone could help me out I really...
Well data for 88gr eld-m and 5.56/223 is scarce ie none to be found. Trying to find a good starting point with AR comp and 88gr eld-m at 5.56 pressures seating bullet to 2.490 in lc brass. Thanks for the help much appreciated..
I have the Lyman one you are asking about. If you are doing 20-30 cases it's great. If you are doing 50 or more look into getting the Frankfort arsenal case prep center with built in case trimmer.
Need some ql help for a 5.56 ran upto 5.56 pressures of 61k not the 223 pressure of 54-55k
88gr eld-m
LC brass 30.0gr of h2o
Leverevolution powder
Bullet seated at 2.360-2365
Thanks
Made it to the range looks 71.0grs , 72.5 and 73.0 were the winners from 7 loads. Will load up 5 each adjust seating depth just a hair. Will try and chronograph next time..
Thanks dr Mike I found your ql info rl17 after I posted this. I appr3ciste the other two. I also read you had a good load with big game and rl19 as well you mind sharing that data? Thanks
John
Good evening hope everyone enjoyed thanksgiving. Seeing if anyone could run ql for a 325 wsm using rl26, h4350, rl17 with a Sierra 220gr boattail seated 2.876 rifle has 24 inch barrel thanks.
Went to the range today with chronograph in tow. First up was my 280 in a Remington 700. 59.0grs RL 26, 160gr Accubond, Rem 9 1/2M, seated at 3.330, avg 2892 FPS.
Next 7-08 in a model 70- RL 26, 162 hornady btsp, Rem 9 1/2M, seated at BTO 2.255, avg 2740 FPS.
Next Ruger 77 6.5 swede. RL26...