Recent content by hoyt-6190

Can someone run a quick load with ram shot grand 257wby, fed 215, Norma brass, 110 accubond, coal 3.209”.

Do you set this up like a normal sizing die?

I’ve had multiple. Great scope imo. Honestly I think they are better than the Leopoldo vx3hd I have.

To understand correctly 100% case fill would 70.40 grains. This data is pretty close to noslers. Looking at the viht load data for 135gr they show a max 74.2. Any ideas why there would be that much variation? That is with a135 sierra hpbt that is 0.07” longer and viht shows a oal at 3.268”.

would someone be willing to run a quick load on the following: 270 wby Norma brass 140 partition Fed 215m N560 Coal 3.23” and 3.36” Thanks

Are the solid base bullets bonded?

I was unable to load 140 Partitions to the book OAL of 2.955" due to location of o-give. Just and fyi.

Would someone be able to run a quickload for a 6.5 PRC using 127 Barnes LRX, Hornady brass, CCI200 primer, 24" barrel, COAL 2.865" with H1000 and RL26?

Just looking at the nosler data, I was gonna try h1000, h4831 and rl26 first. Not in any particular order. I’m hoping to be around that 3200 fps number.

How do the thrown charges from the link compare on a beam scale?

Anyone ever use 130 accubonds outta the 6.5 prc? Mind sharing any load info?

Is it reliable? I have one that I went through the calibration with and maybe dispensed two charges just to see how it worked.

Dr. Mike- So if I am reading this right the max load for this combination for H100v would be 61.8 grains correct?

Wondering if someone could run a quick load for 257wby, 110 Accubond, 215M primer, wby case, COAL 3.209".

Just didn’t find the accuracy I was looking for everything at 100 was greater than 1.25”.