Recent content by Justramit

Only shot 3 shot group at 100. All touching.

Well I finally got out to try it. Loaded to 2.94 COAL and used Ramshot Hunter. 46.1 grains was highest I went and was 2550 fps. Accuracy node was 45.5 grains at 2520 fps. This is with Mcgowen 8 twist 22" barrel.

Finally going to start playing with this, have some free time. I measured wrong first time coal to lands is 2.985 with the 180. So I should be able to go 2.950

Federal terminal ascent also

Hornady interbond, norma bondstrike

No can't quit go that long I checked today and 2.910 at the lands with 180. With 162 is 2.950 at the lands.

Thank you will probably load out to 2.950 though. Should help.

Yes will be aics mags can do 2.860 in plastic p mags or if go with accurate mag and no binder plate 2.950

Guy on another forum was getting between 2550 and 2600 with 20 or 22" barrel can't remember. Just have to seat long

Starting at 2500 fps is only like 2.5 moa more drop at 1000. Benefits in wind are worth it

I have quit a bit of RL 17 and ramshot hunter. Think I will try those.

Even if can only get 2500 fps the bc is so high would be worth it.

I just received new barrel for my rem 700 7mm-08. Is 22" 1 in 8 mcgowen I want to try the 180 eldm in. I was wondering if someone could run quickload to give me idea on what powders might give most velocity. Thank you guys!!!

Thank you guys!!!!

I was wondering if someone could run quickload for 7mm rem mag with 180 eldm. It is in 26" barrel and federal brass. I was given 8 lb jug of H870 and was trying to use it. Can't find any load data on it.