mjcmichigan's latest activity
-
Statistically equivalent; but interesting data, nonetheless. This is the sort of stuff I have enjoyed doing over the years, if only to... -
i used imr4350 instead of 4320 after looking up my info @ 53.5gr w/sierra sbt's.
-
If you have H4350, pick a 130 of you’re choosing from who you prefer. Any plain old 130 Hornady, Sierra, Nosler, etc will work great...
-
As great as the 130 gr bullets are in the 270 Win, I prefer the 140 gr bullets for balance between velocity and weight for better...
-
First, welcome to the forum. I’m partial to the 270 Win and have 2 of them. Your 4350 will treat you very well with either 130, or 140...
-
My experience with the .270 is somewhat limited compared to others here. You could say I’m late to the party as I’ve typically preferred...
-
Welcome to the forum. The classic powder for the 270 Win 130 gr bullet is H4831. Another good powder, if it's available to you, is RL22...
-
Welcome aboard, I think you’ll find many here appreciate the 270 as overlooked as it may be. I believe I still have a set of dies but I...
-
mjcmichigan replied to the thread 270 powder.With Barnes TTSX, my 270 loved RL17. SD was 3. H4831 was the previous owners go to powder, but i was seeing SD's like 30 so set it...
-
I’ve use it in 45-70, 270, and 308 Win. It’s been very good to me. Accurate and high load counts. It seems to be along the same lines as...
-
I’ve had very good luck following Barnes data for seating for OAL.
-
I was about to say the same in fact I use the Harvey deprimer tool, all my sizing dies I have removed the depriming pins.
-
If you lend up nocking the primers out just toss them. They don’t spring back when removed and they won’t be as snug if you reseat them.
-
Remove the decapping pin from the die . Resizes without touching the primer.
