Ralt71's latest activity
-
Ralt71 replied to the thread Seating depth.I think what Blkram stated here is the biggest factor in what you are seeing right now. Like he said, to prove or disprove this. Set... -
If you have a long throat, you will have more jump to the rifling, and once you have hit max coal for your magazine, you may not be able...
-
Thanks everyone. Manny is almost finished with his 2nd round of antibiotics. He's getting up and moving around a little better each day...
-
Many of you know we lost our oldest son on 4/8/26. While we where staying at the hospital family members were taking our dog out and...
-
Don't mean to sidetrack this thread, but would like to see your review after you have rung out the new NX6! (What reticle did you go with?)
-
Ralt71 replied to the thread New girlfriend.Great looking rifle!
-
6 BRA built by Bat Machine. Need to look for a scope and rings from EuroOptics. Once the rifle is dressed up, I will clean the rifle...
-
Ralt71 reacted to Wolfshead's post in the thread Another question for all us hunters: Favourite method? with
Like.
I hunt Whitetails, and I love to still hunt in the thick, close, woods here in the northeast. Love finding the main trails, and going... -
55 grain bullets go very fast from the well-worn 22" barrel of my 6mm Rem, but the 75's have always grouped better and are excellent on...
-
You could easily use 55 BT or 58 grain VMaxs if you were so inclined. The jacket on the 55 BT and other is plenty thick to take about...
-
Ralt71 replied to the thread To anneal or not?.I don't want to complicate this, but all you are doing is returning the brass to a more soft state after being work hardened. Too much...
-
I’ve got a Burstfire annealer and run my brass through it every time before I size my brass. I should have started annealing my brass...
-
I loaded my first rounds back in 1954. it wasn't until the mid1970s that I tired annealing my brass. One of the riflesI load for isa...
-
Just trying to recall the simple annealing process used by some prior to annealing machines...IIRC Place your cases in a cake pan with...
-
Ralt71 reacted to Blkram's post in the thread I need help with reloading a 280 Remington with 19 in barrel with Like.
All of my 280 Rems over the years have had 22" barrels. I ran 160 and 162 gr bullets in my first rifle (Browning A Bolt) with IMR 4350...
