308 with w748

STRYKERS1X

Beginner
Nov 14, 2026
3
3
Has anyone used this combination

  • Remington 9½ Large Rifle primers
  • Winchester W748 ball powder
  • Nosler 165-grain .308-caliber AccuBond bullets
If you have used this combination, what was your starting load?

If you haven't used it, what starting load would you recommend based on published load data?

Any advice or guidance would be greatly appreciated. Thanks!
 
Welcome to camp friend.

I have never used any W748. All of my 308 loads consist of either Varget or IMR 4895 with both 150 and 165 gr bullets. Maybe someone will come along shortly with what you want to know
 
Welcome to the forum. I’ve never used W748 but I believe it might be a bit to fast a burn rate for 165 gr bullets.
I have had great success with Varget and 165-168 gr bullets.

JD338
 
Years ago, I tried 748 in my first 308. Don't recall the load but do remember it wasn't very accurate. Might have been the load combination, could have been me. Went with IMR4895. Last few years have been using RL15, Varget and Tac. If you already have the 748 try it. If not go buy a pound of Varget first.
 
Hello STRYKERS1X,

I have some experience using Win. 748 in the 308 Win. with 165 gr. Ballistic Tip bullets. I was loading for my brother's Savage Stryker pistol with a 12"-14" barrel. This pistol shot lousy with factory ammo. I am talking about 4" groups at 100 yards.

At the time (early 2001), my research led me to believe that Win 748 was popular for the 308 Win. cartridge so that is what I tried. I was able to achieve a 10 shot, 1" group at 100 yards with this load:

Brass: Winchester nickel plated from factory ammo
Primer: WLR
Powder: Win. 748
Final load: 47.0 gr.
Bullet: Nosler 165 gr. BT
C.O.A.L. 2.932"-2.933"

I didn't have a chronograph at the time, so I have no idea of the velocity. However, it proved to be very effective on whitetail bucks. My brother killed several with it before we could use rifles here in this part of NYS.

Here is the research I found on the range of powder charges from sources at the time. It shows the starting load for various bullets.

DSCN2556.JPG

I hope this helps.

For the 308 Win that I load for now, I use Varget. If you are interested, I can provide data for that.
 
748 worked great for the 308, I haven’t used it in years, but some of my 358 ammo I found the other day was fueled with 748. There’s a lot of newer stuff, but it isn’t half bad.

Dan gave you a great load. Seems like you could make quick work of it.

760 is pretty slow in the 308, it’s the same as H414 which is similar to 17, so until you get into the heavy stuff, I’m not sure you’d get enough in the case to make great speed.
 
Hello STRYKERS1X,

I have some experience using Win. 748 in the 308 Win. with 165 gr. Ballistic Tip bullets. I was loading for my brother's Savage Stryker pistol with a 12"-14" barrel. This pistol shot lousy with factory ammo. I am talking about 4" groups at 100 yards.

At the time (early 2001), my research led me to believe that Win 748 was popular for the 308 Win. cartridge so that is what I tried. I was able to achieve a 10 shot, 1" group at 100 yards with this load:

Brass: Winchester nickel plated from factory ammo
Primer: WLR
Powder: Win. 748
Final load: 47.0 gr.
Bullet: Nosler 165 gr. BT
C.O.A.L. 2.932"-2.933"

I didn't have a chronograph at the time, so I have no idea of the velocity. However, it proved to be very effective on whitetail bucks. My brother killed several with it before we could use rifles here in this part of NYS.

Here is the research I found on the range of powder charges from sources at the time. It shows the starting load for various bullets.

View attachment 30555

I hope this helps.

For the 308 Win that I load for now, I use Varget. If you are interested, I can provide data for that.
Which primers were you using for those loads? Everything ive been seeing on the 748 for 308 loads says to use magnum primers. Since im pretty new to reloading i figured id rather ask and play it safe.
 
The primers were Winchester Large Rifle abbreviated as WLR. I did NOT use Winchester Large Rifle Magnum abbreviated as WLRM. Back in 2001 when I was working on this load I don't remember anything about anyone suggesting that we use magnum primers with Win. 748 powder. I just checked my Nosler reloading book and it calls for WLR primer.

If you have any questions as to which to use, just try it with both and see which works better for you. Just duplicate your load work up with both primers and see what happens.

It so happened that in my case with the Stryker pistol the groups really opened up when I went above 47.0 grains, significantly below the max load of 49.0 grains.

Good luck with your efforts. Let us know how you make out.
 
I’ve never found a need for magnum primers in 308 Win with Ball powders. W748 will work for you , I’ve never used 165gr bullets in 308 Win. , Dan has posted some proven loads.
 
Back
Top