Search results

Thanks, but I know some loading manuals will give the cup listing on a load, I think some have said that 53 grains is max load listed for this bullet and powder, I just thought someone may have had that listing from an older nosler manual?

Does anyone know the pressure listing on a 25/06 load with 115 gr nosler bal tips and reloader 22 at 51.5 grains? Thanks

32 grain 204 partition for deer and bear You can not be serious can you?

The thing that gets me is nickel brass looks nice, but I have had a few coyote callers with me that they have that nice shiny brass and have 6-8 rounds in the stock holster and they get on a point to call coyotes and it shines like a beacon, they ask why they have some spooky coyotes? I think...

I too have never seen the need to go to a 257WM versus a 25/06. What little you gain and it is little over the 25/06 isn't in my mind worth the extra burnt powder or brass prices. Your not going to kill anything "deader" at 500 yrds with a .257WM over the 25/06 if both are using quailty bullets...

Thanks Nosler 3 again for replying, since no 25/06 brass is made by nosler what brass are you using on the loads? Winchester?

Thanks for the reply nosler 3.

Went with the winchester ammo, thanks for the replys :roll:

So I take it after a few days and no response Nosler doesn't have that data available? I can go to the winchester web site and get the data for theri loads they sell. Can anyone offer some insite on this matter with nosler ammo?

I think I'm going to shoot your custom ammo until I get setup again for relaoding, I'm thinking either the 110 accu bond or 115 Bal tip load for 25/06 you make. Do you have ballistic tables for these loads? To see fps,ft lbs energy, bullet drop and wind drift? I would like to compair them to the...

First let me say I have a leupold vari xII 3.5 x10 and it is a nice scope and has killed quite a few coyotes, but you must also compair apples with apples. You can compair a vari 3 to a fullfield scope, I would compair the signature series and diamond series with that of the higher end brands...

I had a post on the recipe for the nosler 115 grain 25/06 on here and had some information and now I can't seem to find it? Also what brass does nosler use with the 25/06 anyone know? I may just break in barell with cheap loads and purchase nosler ammo for awhile, anyone shoot this and what...

Thanks bluedot, If I can get over 3050fps that would be great. With reloader 22 rem 06 says he crono that load at 3100 that would be satisfactory for me, I just don't want pressures at that 62,000+ range. I would like the load to reach around that 80% level. I guess I need to get the new...

I am using a burris fullfield II 4.5x14 with bal plex as a scope, I'm going to put a stoney point turret on it so I would like the 200 zero then use my turret at 300,400,500 and 600 yrds with appropriate clicks, I'm sure it won't be dead on with the reticle dots, hence the need for the turret...

I'm thinking on bullets and ammo and wondering if the CT bal tips can be used well for barrel break in? Or should a guy used just the copper BT's bullets? I'm wondering for this 25/06 if I could use winchester supreme 115 CT's and break in and use these? They state MV at 3060 and drop at 500 of...

Thanks guys rem 25/06 what kind of pressures do you have with the load of rl-22 at 51.5 gr? I need to get a new nosler book as mine is no3 and doesn't list any of the reloader powders in it. I did see on the nosler site them showing a rl-19 load. That OAL is max for the 25/06 correct?

I was wondering if someone from nosler could tell me OAL on your 115 grain load? Also what does it cost to get ammo shipped?

I'm new to the site but been hunting along time. My question is this what powder, primer, case, OAL shooting out of a rem 700 SP have you guys had good accuracy with? I used to reload years back and 100 gr bal tips with 52 gr 4831 worked well, but now new bullets,powders etc have come out and I...