Search results

6 ARC, pockets are tight, but casehead expansion is so much that there is a distinct ring above the rim at the bottom of the die. Hornady brass do fine. Also having a problem with SRP 6.5 creed but that is probably my ignorance, didn't know it takes a different firing pin in most AR10's

upper level loads ruining brass with 1 firing, same load in hornady is fine.

with starline brass? not a good experience for me at all

How do you like it? just got a deal on a slightly used one, trying too figure out the features.

if you run a larger expander in one case you don't have to fire them first

Awe, she'll probably let ya gut and drag :ROFLMAO::ROFLMAO::ROFLMAO:

I do the same except I run the next size up expander ball into the case, instead of painting it. case life of belted cases is greatly improved if you set your die so the cartridge will headspace not only on the belt but also the shoulder.

I suppose due to higher SAAMI pressures?

Thank you!

once you replace the pin and bushed the bolt can you still use LR primed cases?

Have no problems with 140 Bergers, or 135 atips, just the 135 Berger using the same primers. Think it's seating depth related

Federal match srp's, tried some staball 6.5, still piercing primers at anything around 2700 fps with 135's, velocity is creeping up with slower burning powders, going to give 7828ssc a whirl

Anyone having problems with it? I bought them due to scarcity of large rifle primers. It seems when I get close to book max loads, I start having weird pressure signs with dismal velocities. Pierced primers, cratered primers, zero case head expansion, doesn't seem to be sticky on extraction...

congrats man, wish I could breathe good enough to exert myself just to lose 10, gettin old ain't for sissy's

here perhaps? said 164 in stock this morning https://www.aeammo.com/products/hornady-82735-090255827354-5a18-5666

midway has remington 35 ammo in stock as of today

https://www.midwayusa.com/product/1001788230?pid=286210

how many times have we saw this in the past? 244 went to 6mm due to a twist change 223 went from a standard 12 twist to 9 22-250 went from a 14 twist to 9 270 WSM went to 6.8 western with a twist change beginning to think either the makers are just now learning about twists or its all a big scam...

I learned long ago to pretend the belt is not there to get longer case life, I always set my sizer die so the cartridge headspaced off the shoulder.

or just more available? near as I can tell they are almost equal as far as ballistics.