Search results

Dear Semper Fidelis : To be frank I have no head space gauge or any other measurement it this regards. But I will mark the shoulder and set the full die as you and Mr. Dr.Mike mentioned. I will try just a very tiny touching of die in shoulder lets say 0.003. And I will do it as Nosler Partial...

Dear SEMPER FIDELIS : Thanks a lot Sir. Best Shooting to you all Rami

Great .SemperFidelis. Thanks , I got the point. only that much will be partial neck size with Full Die? Bests Rami

Dear DrMike: I got the page 42 about the topic. I should mark the shoulder and neck so that when neck sizing with full size die , it shows it's effects.Do I ? And I got this fact that there must be a space in between die head and head shoulder ( 1.5-2.5) for partial neck sizing with FL die...

Dear DrMike: But you did not explain to me how to Partial Neck size by Full sizing Die!! Is it deal with high accuracy ? Best Regards Rami270

DrMike: By the way , is the powder of 300Mag. the same as 270Win.? I mean same burning rate . Bests Rami

Dear DrMike: I appreciated of your instructions and comments. Please explain to me how to Partial Neck size by Full sizing Die!! I mean what is the advantages and disadvantages of this method with Full size Die? You mean I cancel neck size Die and I size the neck with full die?! Kind Regards Rami

DrMike: Certainly Sir. I will try my best to treat them all as series... I have both full size die by Redding and Neck size by RCBS. I usually size the neck of cases up to 1mm or 1.5mm to shoulder. I heard to full size each case after at least 6-7 times reloading or whenever the action has a...

Mr.DrMike: Hi, I wanna neck size some cases for AB130 and I wonder if I neck size till end of neck or 1-2mm above shoulder and neck border. Considering this fact that I put most part of the bullet inside the case it is wise to keep a harmony and size the neck fully till close to shoulder? I...

Mr. Dr.mike : You mean it deals with groove spin to the left or to the right. My barrel's groove is to the right. Thanks Rami

Dr.Mike : Why the group is jammed in the left with Nosler AB , while it is vis ver sa it is on the rigth with Sierra pro hunter. Best Regards Rami

DrMike: I appreciated of your kind help and advices. I am a little puzzled that why Sierra 130 pro hunter gave me 25-30 cm trajectory below target while with the same powder and same components , the Nosler Accubond 130gr. gives me a group around the target that is 12-14cm trajectory below...

DrMike : Thanks so much. Is it necessary to a very like crimp? As I told before, there is no sign of pressure and I can use max. to 45-46gr. loading.And you did not advise me about sign of copper on mouth of barrel. Re to cases, I have 2 kinds of cases some light and some a little heavy. if I...

DrMike : Hi. Thanks so much for your comment. There is no pressure sign in cases or anything else. it is only a minimal mark and effect of bullet color (copper ) is seen in the mouth of barrel... can I add 1-2 grins to my load to increase the velocity to around 2900? Also I wanna increase the...

Hi there all: I have just finished the test of AB130gr. in 250 and 300Meters and I got satisfied more that Sierra and Hornady. My first shooting and getting groups in target with Nosler Products. the group size for 250M. was wonderful , it is 7.5cm and for 300M it is 18!! I had a flying shot...

Yes, but if considering magazine length as it is Mauser m98 action , it must be below 3.314. The magazine doesn't allow more than this size!. in single shooting it is ok but in hunting situation hmmmm, I must tweak back acc. to magazine. Regards Rami

Hi there all: Is it wise to make CAOL around 85.00 or 86.00mm I mean single shooting with this length and more than SAAMI Std 84.84mm for 270win. . I try to do it with AB130 and I am in doubt!. Thanking You Rami

Hi there all here: I am trying to find a sweet spot for AB 130grins for 270win. I wonder for such a long CAOL even more that SAAMI sd CAOL. Considering magazine size and long ogive in Nosler AB , it gets more shorter , below 3.314'' , while it touches the rifling in 3.409''!! Best Regards Rami

Hi there all : I 'm wondering about the max. and min. jump of bullet in chamber ! I want to tweak it back around 3.287'' . Thanks Rami

Dear Gentlemen I appreciated of your notice and sorry to bother you I use metric. To be truth , considering your all perfect experiences of loading and loading on and on , here it is very poor and as new comer to reloading , I try to dig my own way to follow usa standards and guidelines. Sierra...