Search results

If your shoulders are blowing out that far then it sounds like your dies are setup wrong and overworking your brass by pushing the shoulder back too far. If you are FL sizing and you set the dies up per the instructions then you are probably overworking your brass. A belted mag should be...

Thanks guys Quickload request for those of you that have it, please. WW Brass CCI 200 Barnes 80 TTSX 2.750" - .030" off the lands 48.0grs H4831 - I know, strange powder choice Thanks!

4350 loads look good

The ttsx is not cooperating at all. I won't be afraid to run the 95 NBT into a whitetail though.

My .243 Win is refusing to shoot the 80 TTSX, simply refusing, so I changed gears. I have a couple of boxes of 95gr NBT so I figured I would give them a whirl. It looks as if it's going to work out. WW Brass CCI 200 IMR-4350 - 41grs 95gr Nosler Ballistic Tip 120yds

All mine are factory rifles that are bedded and floated. That's interesting, it's obviously working for you

Dang, I've never done that. I wait enough time to work the bolt and get back on target when shooting for groups or for speed.

10 minutes between shots?

30/06 - 165/168 .358 Win - 200's 35 Rem 200's 7/08 - 150's 45/70 - 350's 223 - 55's and 68's and 70's and 75's 243 - 55's and 70's I heart 4895

Mule Deer on the 24hourcampfire says in his tests 100V is very temp sensitive.

Yep

40grs 4350

45.5grs IMR-4350 is right @ 3200fps from mine with the 80 TTSX with very small and very consistent groups. I just seated mine to the center of the top groove and kept adding powder.

A friend uses the 123 Scenar in his .260 Rem and from what I've seen performance is great.

I always size my belted cases like nonbelted cases, I just bump the shoulders back .0015-.002" and I get 12+ loadings from them. Following the directions they send with the dies is a good way to overwork your brass and shorten case life.

I second that motion

That's better, I like this positive thinking and that sounds like you are going to get one so we can still be friends.

You don't own a 30/06? I'm afraid we can't be friends anymore........

It is like lightning struck them. 130 TTSX 54.5grs H4895 WW Brass CCI 200 Sparklers Light Crimp with LFCD

IMHO, I would not reduce the 130 TTSX, they like speed. I would load the 125 Nosler BT at reduced velocity.