Search results

Hery that is a good price. how big is your tent. In Colorado at 10,500 and above, it can get 0 degrees pretty easy even in second season (end of october) I was trying to go the barrel kit route, but I am wondering if this gets too hot from the thin barrel material to place in a tent without a...

Not sure if this is the right forum thread so apologies ahead of time. For your hunting camp stove in those who use wall tents (mine is 14x16) Do any of you use the Vogelzang Standard Barrel Wood Stove Kit with a 30 gal or 55 gal drum for heating inside the tent? I was told that the...

Thanks Scotty, There were some 37 Friday night. Either a few people bought up everything or there was a glich? ...or I am getting really old and just can't see correctly 2 feet in front of me. :mrgreen:

I saw about 37 categories of seconds on Friday evening. Saturday afternoon, they were all gone? Was that a mistake displaying all these seconds but they were not really there?

I had that one figured out in 1.4 seconds. Its when trying to load a rifle for single shot that is still baffling me years later. I just can't figure out how to push that round down the barrel from the muzzle. :lol: 338winmag

What I feel is a priceless tool is the Digital Headspace Gauge from Innovative Technologies. Thanks 338winmag

"Set the bullet grip at about .002"" & "also keeps neck tension consistent from first firing" Oh man! good points guys. I forgot about those! Woods! Great to see you!!! You are a rocket scientist. :grin: 338winmag

Hi Team, I have seen a few times in this post where people are stating a "ten-thousandth" measurement. Please discern my "thousandth" numbers are for the diameter measurement just above the belt of a "magnum cartridge only". This is what I have found: You can measure this with the knife...

After testing 5 different powders and a gazillion seating depths with those powders, I decided to try H4831sc for my 338 Win Mag and Nosler 225 ABs. I am sold on this powder. Like you, I found accuracy and FPS to be extremely consistent all the time .... but I did sacrifice about 50 FPS with...

Hi Martin, I have found that if I compare fire-formed brass to virgin brass, I have found headspace off the shoulder to be sometimes .012 and greater. Full sizing will not correct the virgin brass in this respect. Neck concentricity can be corrected via turning but I am not sure of the...

If I am thinking correctly what you are asking about, at least for belted magnum cases: This is what I have found: You can measure this with the knife edge of a caliper. The area "just above" the belt for most all virgin belted magnums measures at approximately .5065. After each firing, this...

I am such a grasshopper here :grin:

Okay Okay! I have been talking to Scotty about a second rifle in my personal arsenal up here in Colorado. Scotty came straight out and mentioned the 270 WSM and now I see this post and replies so ..... I have read a few times that the 7mm WSM has a fairly short barrel life. Aside from that I...

Dr Mike, is there any caliber you haven't shot? :mrgreen: :mrgreen: You have great reloading experience and I think we are all seeing why now... Can we all participate in a Vulcan mind meld and get some of that knowledge just a little bit faster? Nice shooting on all rifles.

Scotty! Wow - You are the 250 gr 338 Win Mag Man Great shooting buddy. Hey I noticed you used the cci250s. Was there any particular reason or it is just what you had on the shelf.

Reseating a bullet - tried that before creating post. At least for this 7mm-08 case, its a no go. I am not sure stepping up to a 30 caliber will work or if it will just crunch the neck. (possible try) I might try the drill bit trick but not to confident that will work. (worth a try) I did...

Thanks ... a lesson learned. Silly Me! :roll: I can buy another for $5.99 or split the sides with a dremel tool. (I make my own sometimes and a split on each side works as well. I was trying to avoid the above by some trick someone might have thought of without too much issue. Thanks All...

Well, I was walking someone thru how to use the Lee Collet die and RCBS press and I used my Hornady modified case in the process. Mistake! I realized this 2 seconds after I resized the neck in my explanation to another reloader. Unfortunately now the neck is set for reloading a bullet instead...

What great replies with info!! I have never reloaded with Partitions but I am sure am excited about it now. :mrgreen: :mrgreen: :mrgreen: Thanks alot everyone! 338winmag

Thanks Guy! I believe the Nosler Partitions it is for the 30-06 After re-re-reviewing the Nolser #6 and other references, I might be thinking the 180s for the 300 Win Mag might be the better bullet. Any other thoughts? 338winmag