Search results

My Howaby came pressure pointed. When I switched to the B&C stock I left in the pressure point. Gun shoots great so I am not inclined to mess with success. The factory tupperware stock almost always needs to have the barrel channel sanded to fix the stock rubbing more on one side than the...

If you have a piece of doweling, sanding block and some sandpaper, 180 or 220 grit, you can do the job yourself. Pull the stock from the action, take some off using long light strokes all the way up and down the barrel channel. I have done this on two guns with tupperware stocks. When you...

Get him a NEF Sportster in 17HMR. The LOP should work for him if a Pardner fits. I have a 17HMR Sportster with a cheep Tasco 6.5x24x42 scope on it. Much more accurate than I am. http://www.hr1871.com/Firearms/Rifles/sportster.aspx http://www.hr1871.com/Support/accessoryProgram.aspx ZM

I have one. I changed out the tupperware stock with a Bell & Carlson Medalist. The Medalist fits better and comes with a Decelerator pad. Added a Nikon Buckmaster 4.5x14x40. Trigger is owner adjustable. Gun shoots great. Best deal out there for a magnumb rifle.

I use RL-15 in 308, 300 Savage, 303 British and 7.62x54R. Results are good enough that trying other powders isn't needed. ZM

I'm using IMR 4064 with someone elses 175gr bullets in my milsurp Mausers. I don't have data for 180gr bullets. I have data for 170gr bullets. I would start around 45gr of IMR 4064 and work up carefully. This is a low book load in the Speer manual. Hope this helps ZM

My Howaby 300 WBY has a mag length of 3.575". Nowhere near the lands. Doesn't seem to affect accuracy. I'm using H4831SC and 180gr Protected Point Partitions in a 24" barrel. Accuracy is always under an inch with whatever bullet I use. Once in a while the holes touch if I do my part. I'm...

SM Guns in Eugene had a 99E about three? weeks ago. It has been altered but would make a good shooter. Price was $350? ZM

I think you will have to buy some, fill the cases with powder, weigh and adjust accordingly. ZM

The Nosler data is right in the ballpark with the Speer manual. I'd be suspicious of the IMR data. ZM

H4831 and Partitons. Works well in my 270 ZM

No. The XD is supported almost all the way to the rim. At least it is on my brand new XD 45. Great gun by the way. ZM

http://www.shootersproshop.com/reloading.htm

9.3 x 62 300 H&H 416 Rigby ZM

270 300 Savage bolt action 6.5x55 7x57 250 Savage Those rounds come to mind right off the bat. If I was in your shoes I would be trolling the gun stores for a Bubbaized M99 Savage, restock it with new wood and a Decelerator. ZM

Yep I'll take my chances with another brand to get precise click adjustments. What's the difference between a Rifleman and a VX-I ? I've seen them both at SW side by side for the same price. ZM

Use data at own risk! M700 ADL 22" barrel 60gr H4831-SC Remington cases WLR Primers 130gr Nosler BT, seated .010 off lands 3012 fps ZM

I am using 180gr Sierra's and RL-15 for my 303 rifles. ZM

I have a 4x40 Nikon Buckmaster on my M700 270. It's an excellent scope. ZM

Sounds like you need to screw down the sizer die some more, if your rounds are hard to chamber BEFORE you fire them. Try this: Find fired empty case Resize, trim to length Try to chamber empty case in rifle. If you can't chamber easily, turn sizer die 1/4 turn and try again. Keep trying...