Search results

I crimp all pistol and rifle rounds for semi and ba's (don't own any rrevolvers). It's a choice as we use what works for the individual! I will say 357sig need a crimp as there's not much neck to hold the bullet very well. Probably any bottleneck pistol cartridges need it.

62-75gr would work the average on distance as lighter might not be as good when windy or past 300 yards on a 16" barrel.

i'm another of these young'ns on here..............i was 3 3/4 (3.75 for decimal lovers) years old and couldn't say what i was doing. depending on tod i could've been bouncing around in the feed truck out feeding cattle of my parents teaching me how to write right-handed cause they couldn't...

i'm waiting on a 277fury ar barrel, but it's not for 80k tho.

go to https://www.xxlreloading.com/caliber-load-data/.277-fury as there you'll find both commercial (65k max) and standard (80k) data

I've used my 550b since '84 and 550c since '16 with good success. When I started reloading in '84 it was for 44mag and 264wm. With the 2nd stage being their powder die and hopper is set it @ 61.3gr of imr4831 for the 140sbt sierra's. I never chrono'd any back then, but seem to be very...

THE NEXT ISSUE WILL BE HAVING THE ABILITY TO RELOAD...................NOT SURE IF FED GOT ALL THE KINKS WORKED OUT OF THAT PROCESS YET?

THE BIG DIFFERENCE IS SUPPOSED TO BE WITH 15K EXTRA PSI ON MAX FOR THE ADVANTAGE ON SMALLER CAPACITY CASES. NOTHING DIFFERENT THAN THE 277FURY, BUT W/O THE 2-PIECE CASE. SURE YOU CAN GET THE SAME VELOCITIES WITH THE SAME BARREL LENGTH OF THE 7BC, BUT REQUIRES A LARGER CAPACITY...

Any pre64 is a winner! Great find! I tried getting Winchester to replace the barrel on the '61 model 264wm of my dad's, but wouldn't do it since it still meets their moa (1.5 or 1.25) before they'll replace it on their nickel. I've put over 2,500 rounds down the pipe since i started...

Just call them and they'll help you. Many have gone away from actual shooting opposed to ql for data

on my dad's pre64 i used 61.3grs of imr4831 w/sierra 140sbt's. that's the load i started with and have used ever since until i stopped shooting the rifle 2,500 rounds + down the pipe over 30 odd years not counting the 7 years before i started reloading. started shooting it at 11yo and...

But the satisfaction is rewarding on the job done by yourself! I'm thinking about changing my name cause too many people use it when wanting something :ROFLMAO:. Tireless work

For 308win to me anything less than 16" isn't very efficient. 18-22" for 150-168's is near perfect. I only have 1 308win with a barrel longer than 22" (26"rock river ar).

like hollywood, felons are a prerequisite for being a politician

not just cartridge, but caliber (bullet diameter) as well

sierra's 210sjhp worked well for me. but then again there wasn't anything the 629 8 3/8 didn't like. 180's would be my choice tho. as far as the gold dots go, i haven't tried any in the 44mag, but did shoot some in the 50ae. since deep (wt & mule) are thin skinned the xtp's would work...

somebody goosed the moose

if i ever get around to annealing, i want to do a 264x300wm and/or a 277x300wm or just do 300prc versions as to keep the .540 face. the 416r face would be a bit much and there would be a lack of action choices and they'll be heavier.

i mentioned sig, but didn't state it as sig sauer

i've been wanting to do that for a garage floor. my next house will have that along with it being able to cool............no hockey allowed :ROFLMAO: .