Search results

I appreciate the tips everybody. It seems that most of the advice given are things we are doing for the most part, so at least we are on the right track. Thanks again Sent from my LG-H830 using Tapatalk

Where we are hunting its impossible for them to circle us without being seen, on all our stands Sent from my LG-H830 using Tapatalk

Hey, you could always strap a 5 gallon bucket to the rear tire of a truck, back her up, set it in drive and just watch it turn for a few hours. ( voice of experience kind of laughs at it now) Sent from my LG-H830 using Tapatalk

Absolutely. We've been particular about having the wind to our faces Sent from my LG-H830 using Tapatalk

That may be a contributing factor as well Sent from my LG-H830 using Tapatalk

We have tried that some as well. The more I think about it the more I feel like conditions just haven't been right. I think inexeperience is playing a huge part still as well! Sent from my LG-H830 using Tapatalk

Currently in central Ohio, where the weather has been a roller coaster this year! A few if buddies and me have been hunting some coyotes, but havent had much luck. We know they are in the area, and have found plenty of evidence to substantiate their presence. Rib cages from dead, a skunk...

Makes enough sense! That is some integrity for sure! Sent from my LG-H830 using Tapatalk

I'm not fsmiliar with the same day air born rule. Whats that all about? Sent from my LG-H830 using Tapatalk

Hell I hope so. This is frustrating and aggravating. Sent from my LG-H830 using Tapatalk

With the quality assurance or lack there of I wouldnt be surprised to hear someone forgot to torque it Sent from my LG-H830 using Tapatalk

Yes, I knew there was a range. Even at 30 ft lbs, I dont believe I would be able to unthread it with as little effort as it took. It was hardly hand tight. I purchased this weapon ready to fire, did not build it, nor have I disassembled the barrel from the upper before. It should not have been...

I meant to ask, because I don't know. But, what is the torque value for the barrel nut on an ar-10? I recall for an ar-15 being in the realm of 80 ft-lb. But mine was barely hand tight. I'm pretty positive that was not correct. Sent from my LG-H830 using Tapatalk

Notice the gouging? Several of the teeth have it on the back side as well. Theres only one thing that u kniw if that will cause that. Sent from my LG-H830 using Tapatalk

No round being chambered and it operates smooth as silk. No binds and goes into battery perfectly. Now that I tinkered with it, it'll chamber a round but won't eject it now. Its stupid and annoying. I'm going to clean it again and polish the moving parts and see what happens. Sent from my...

Here's a couple of shots of the bolt and extractor. Sent from my LG-H830 using Tapatalk

That I could most definitely understand failure to eject if it were super worn. Thus rifle has probably less than 500 rounds through it. None were heavy loads. Its never shot anything over 150 grain bullet. So I don't think its endured enough to wear it out or damage it really. Sent from my...

No i haven't. From what I have inspected, there is minimal wear on the extractor itself. It is definitely worth a shot to replace it though. Sent from my LG-H830 using Tapatalk

Well. Tried a couple of different springs. Failure to feed isn't a problem anymore. Now its failure to eject the spent cartridge. Re installed original spring and oring and it no longer fails to feed. But it continues to fail to eject. Plunger and extractor both move freely as they should...

Did some research and may have answered my own questions. Probably should have done that before being lazy and just asking. So ill share what I found, so i can possibly help someone else who may have my same problems. Its a common problem for the PA10 to fail to go into battery. Why? Because...