Search results

I got to shoot the rifle today with mostly breaking it in. It shot fairly well meaning about 1.5" at 100 yards. I'm using H4350 and 117 gr Hornady SPBT's and I'm pretty sure it will do better. Very little recoil and it's a pleasure to shoot. Thanks for you help.

Thanks again for the replies. I'm going to start loading tonight and I'll post my results after I shoot. I have a modified case and I'm finding out the rifle is short throated. I don't have the exact number yet but I know the cannelure on the interlocks is inside the neck when it's into the...

Thanks for the replies, I have some 4831SC I can try. Thanks.

Good morning, I just picked up a Ruger Hawkeye in 257 Roberts and it's a great looking rifle. I'm have a Bushnell Elite 4200 in 3X9. Very clear scope and the total set up looks great. Anyway, I have about 150 Hornady 117 SPBT Interlocks and can't find any data with H4350 The Hodgdon website...

Merry Christmas to everyone especially Dr. Mike for all of your help. Take care and enjoy the holiday.

Thank you for the info. I do appreciate it. Take care.

Thank you very much. Have a great day.

Good morning, I have a Tikka T3X stainless in 300 WSM and would like to load 150 gr. Barnes TTSX. I have h4350 but it's not listed on the Barnes website. Does anyone have a starting point for this combination? Thank you very much for your help.

Yes. With 175 SMK's. Thanks again.

Sorry for the delay getting back to the forum. The factory loads are Federal gold medal match. Thanks again for your help.

Thank you for the fast reply. I also have a 308 but use Varget with 168 MK's for some target shooting. 150 grain Game Kings for hunting. Thanks again.

Hello, my friend has a Ruger RPR in .308 and is having some issues finding an accurate load for it. He using IMR 4064 with Federal brass along with federal 210 primers. He's at 42 grains of powder that is shooting right around an inch, 42.5 it opens up to 2.5" at 150 yards. Factory ammo is...

I found that RE26 game me the best results. I’m getting 2840 with the 147 ELDM’s. Groups are always around 1/2”.

Happy birthday Dr. Mike. Thank you for all you do for this forum. Enjoy your day.

Thank you very much for your reply.. I’ll post the results after I get to the range. Have a good day. Take care.

Hello, I was given a 358 STA to reload for a friend. I have a box of Barnes 225 grain Triple Shock flat base. On hand I have H4350 and Federal 215 primers. I’ve searched online for data with no luck. Does anyone have data for this combination? Thank you for your time and replies. Happy New Years.

I have a Ridgeline that a147 ELDM and RE26 works very well. I’m still working on seating depth adjustments but even if I stopped now I’d be happy. Have a great New Years.

Thank you very much for the information. I’m going to try the H4831SC first and then the 4955. Thanks again. I’ll post my results first chance I get. Take care.

Good Morning. I’m loading for a 300 win mag with a 180 grain TTSX. The powders I have are H4350 and H4831. The local store has some IMR 4955 also. If it’s possible I’d appreciate a QL for the H4350 and the 4955. Thank you very much. Take care.

I got in touch with Berger today. They no longer email load data for unpublished data. The data I got from them for RE26 went from 42 to 46.1 with a 103% fill ratio. Velocity went from 2544 to 2800 FPS. Hope this helps whoever is loading for this bullet. This data is for the 6.5 Creedmoor. Take...