358 STA Load Data

[PaLuke]

Hello, I was given a 358 STA to reload for a friend. I have a box of Barnes 225 grain Triple Shock flat base. On hand I have H4350 and Federal 215 primers. I’ve searched online for data with no luck. Does anyone have data for this combination? Thank you for your time and replies. Happy New Years.

 

[Tjay]

From Barnes #3 manual. These loads are the pre TSX bullets so are safe with the TSX bullets.

Remington; parent case: 8mm Rem Mag; primer: CCI 250; trim to: 2.840"; barrel: 24"; XLC Coated X-Bullet data cannot be used with other bullets, including non-coated X-Bullets. Maximum loads should be used with caution - Always Start With Minimum Loads​ Be Alert: Publisher cannot be responsible for errors in published load data.​

Wt. Bullet Powder Manufacturer Powder Charge Velocity (FPS) 225 Barnes XFB Alliant RL-19 86.0 2,941 Remarks: recommended powder 225 Barnes XFB Alliant RL-19 91.0 3,112 Remarks: maximum load; recommended powder 225 Barnes XFB Alliant RL-22 87.0 2,919 Remarks: 225 Barnes XFB Alliant RL-22 92.0 3,087 Remarks: maximum load 225 Barnes XFB Hodgdon H-4350 82.0 2,834 Remarks: recommended powder 225 Barnes XFB Hodgdon H-4350 87.0 3,007 Remarks: maximum load; recommended powder 225 Barnes XFB Hodgdon H-4831 87.0 2,927 Remarks: 225 Barnes XFB Hodgdon H-4831 92.0 3,095 Remarks: maximum load 225 Barnes XFB IMR IMR-4831 82.0 2,948 Remarks: recommended powder 225 Barnes XFB IMR IMR-4831 87.0 3,128 Remarks: maximum load; recommended powder 225 Barnes XFB IMR IMR-7828 88.0 2,940 Remarks: 225 Barnes XFB IMR IMR-7828 93.0 3,107 Remarks: maximum load 225 Barnes XFB Winchester W-760 78.0 2,842 Remarks: 225 Barnes XFB Winchester W-760 83.0 3,024 Remarks: maximum load 225 Barnes XFB Winchester WMR 89.0 2,884 Remarks: 225 Barnes XFB Winchester WMR 94.0 3,046

 

[PaLuke]

Thank you very much for your reply.. I’ll post the results after I get to the range. Have a good day. Take care.