Search results

https://clouthub.com/p/2C6vbGXc

Think they screwed the pooch on that one, seems you can't pull up more than 1 powder, 1 bullet, can no longer compare anything.

and no trimming.

neck tension thee same with both dies? could be the seating method, do you spin the case a couple times during the seating process?

have ran my 6.5 CM out to 1K with the scope, tracking appears to be on the money!

don't like it anyway, lot to lot variance has been atrocious

a buddy wanted one to eat, another wanted a skull, and have too many on that piece of property, just regulating the population. Its a big sow, their small head does not make attractive mounts. sent a 340# male off to be made into a rug last year.

The 2nd pic was my view of the bear from 7:50 till 2:30 when it finally got up and walked to an opening, the 135 Berger classic hunter done an awesome job at 2755 fps from my 6.5 creed AR10, the shot was 388 yards. Had a 50 cent piece sized exit

If it were me, I would anneal it, run a .336-338 expander ball down the neck then size to fit your chamber.

yep, been hunting without dad now for 35 years, the first few were tough, good luck, may you find peace with the memories you hold.

and got to take a walk, saw 3 bucks, could not resist. The 6.5 creed made short work of him

How do they do on deer?

have not and won't just mark it down to a lesson learned.

it is shorter,, starline trims their brass. but what gets me if the pressure is too high for starline brass, why is the shoulder still rounded?

Starline brass measures . 439, Hornady . 436

soon as time permits will measure them and let you know

check out the Arken SH4J 6x24x50 318.00 bucks delivered from Amazon, watch the tracking video on the amazon page. also a youtube video on a comparison with some other higher priced scopes...

I do not. the brass do fine with starting loads, but once you load a top level load every case fired is toast. Look at the shoulder on the right case, its still rounded, not as sharp as the hornady. That concerns me, the front end of the case is not fully formed but the casehead is expanded a bunch