Search results

Has anyone noticed Nosler replenishing seconds inventory has not moved much in 3+ weeks, or is it just me?

Hi All, I updated my Quickload this January\February. My son was looking for load specks for DTAC 115. Unless this is under a different associated name for the databases, I cannot see it. Any one else know if it does indeed exist in QuickLoad? Thank you Steve

Has anyone experience any huge shooting difference between 180gr Partitions PPT and 180 Partitions with Cannelure Right now I have a model 70 30-06 shooting the 180gr Partitions PPT .500 MOA at 100 so I want to get more but see currently only the 180 Partitions with Cannelure I understand...

A friend has a Weatherby Vanguard Compact Synthetic with a manufacturers threaded barrel of 1/2 x 28 He has purchased a Terminator T1+ brake and purchased a 1/2" x28 Muzzle Shim Kit with an OD of .748 The T1+ brake has an OD of .734 approx. So the concern (if there should be one?), the shims...

I didn't take pics but will next time (geesh - back to being a newbie after almost 4 years away from the range or hunting) Using Son's Garmin Xero. I wish I could afford one of these myself but son will let me use his so :) Yesterday's Range Time (Testing for Max Load Powder Charge Only) I have...

Got to the range yesterday and realized I did not have my range protection earmuffs but only had ear plugs. After shooting a number of round with the 338 Win Mag (muzzle break), 30-06, and 7mm 08, I did not realize my hearing was affected till I got into the truck and called home to advise I was...

I have a Weatherby 7mm 08 S2 24" barrel I am using IMR 4350 I have QL but a lil confused on the powder charge options Even at 48 grains the Pressure is listed at only 52269 but the Filling/L.R. is at 106.3 Can a Filling/L.R. over 100% be safe? Honestly just looking for target shooting loads...

I use QuickLoad as well as other bullet manufacturers for "suggested" powder charge weights. In the past I have always started at a estimated minimum powder charge weight and work work my way up by .3 or .5 grs. till I perceive pressure issues either on the case or on the bolt After reading...

Might be a silly question so please excuse my ignorance on this. I am reloading for a friend that has a 7mm 08. This fall we will be hunting for both Elk and Mule Buck. The reasoning for below is because of budget constraints and bullets I have on hand without purchasing more bullets. I want to...

Does anyone have experience with the Nosler PPT Partition and accuracy (MOA) since it is not a pointed tip but a flat tip?

Hi Reloading Rocket Scientists! I am reloading for a hunting partner come this Fall '25 in Colorado 3rd season for a first time for his 30-06. I have reloaded for 30-06 before with standard Hornady bullets and the friends took their Mule deer one shot. I want to work with Nosler for this...

I was about to order some Nosler 7mm 150gr AccuBond Long Range bullets for a 7mm 08 Weatherby Vanguard Compact rifle but saw some reloaders mention they have to seat the bullets very deep into the case neck. I then decided I better measure the COAL length offering of the rifle's magazine for...

Upon returning back to reloading for my 338 win mag, I have encountered a "possible concern" with 45 out of 50 Nosler cases (fired 2-3 times) I also have many other brass manufacturers (Federal, Winchester, Hornady) but am not experiencing this scenario below: I use a Redding body die to bump...

Hi Reloader Gurus, Has anyone got suggestions on how to inexpensively measure (not cheap to sacrifice safety) headspace for a 338 Win Mag. In the past I used a specific FF case that was correctly measured for headspace spec and that worked okay but I am looking for something a lil better...