Search results

Man thats a heat wave😂 Today it’s the warmest in 5 days , currently 5*F

This ☝️

Too many variables to go wrong with building a load without rifle in hand. The first problem is what brass is being used , new or 1x. With sizing brass without the rifle could lead to tight closing bolt due to lack of shoulder bump. First thing I do with any new load is to work up a pressure...

Nicely done. Could have tried a temp stable test , set 3 outside for 10 minutes and checked the velocity. Whopping 2 degrees here today again.

Great idea👍

Man there is really nice member set ups on here.

Excellent deer medicine to boot.

Years ago they used to run their 1cent shipping/ hazmat deal.

A niceturn out to your do it yourself project.

Friday we started out at -30*F with windchills in the upper -50’s and got to -16*F for a high. Yesterday never made it above 0. Today we are at 2*F with a stiff breeze.

Had that done in 2017 , way better than shoulder surgery I had done.

Some neat projects.

Well done👍

The barrels are the action and stock are not from what I can find on internet searches.

That’s the way I went , CVA Scout in 35 Whelen.

I believe the case is shorter than the 6.5 , that would be the easy button.

Looks like they are just shipping out now.

Could follow the Hodgdon’s data for 140s. Start low and work up.

I just disassemble them and spray them down with brake cleaner them blow of with compressed air. Follow with a wipe down with a gun oil on rag.

I ran into that with my 25 Creed. I was lucky that the case is the same length as the 6.5. Just used a 6.5 bushing die and got a 25 cal seating set for a 6.5 seater. You’re at a disadvantage as the 25 RPM case looks shorter.