Search results

What I’m referring to is the bottom. Every stock for B&C needed to be cleaned up so the bottom metal/trigger guard drops in smoothly. That’s the biggest issue I’ve found with them on the Wby MarkV and Vanguards.

YES!😁

Have you marked these to see if they are carrying over to other loads with poor ES? Is there a pattern to which shots are slower or are they just random?

The first thing I do with a new B&C stock is chuck up a small drum sander in the drill press and relieve around the action screw so the bottom metal drops in smoothly. I’ve had to do this to every one I bought. A couple I’ve had to shimmed the back action screw to level the bottom metal.

I see that back in the day Weatherby recommended the Fed 215 with the 224 Wby.

Today I received a holster Patrick made for my Taurus 44. With the red dot installed there wasn’t much out there. I can’t say thank you enough for his workmanship in getting what I wanted.

https://forum.nosler.com/threads/alcan-magnum-large-rifle-primers.46658/ https://forum.nosler.com/threads/little-informal-primer-test.46717/#post-510260 I have no complaints with the magnum large rifle primers.

I going to try to target 1500 to 1600fps with the 410 gr Sub-X bullets. I could get H4198 locally , but $80/lb. So I’m going the route of the 60% H4895 , cheaper. I’ve shot a lot of Blue Dot loads thru this rifle in the past , would be my first choice if available. I have a 18” barrel on order...

Congrats on the doe with the 10mm.

Good to hear , and thanks guys. H4895 is available locally. The original plan was to run the Hornady 410gr subsonic with TrailBoss. That plan fell apart , now I’m looking to run them around 1500-1600fps.

Nice looking call as always.

https://a.co/d/eSvgB83 I’ve used a bunch of these from Amazon with no complain.

Questions for those who have use this. How clean does it burn? How is the ES? Accuracy? Muzzle flash? I have a project that I’m working on with my 458WM. I’ve use a lot of Blue Dot and 5744 both of which are hard to find. Any feedback will appreciated. Thanks , Rick

I got a hard time thinking on dropping 4 grand on Remington pump. Back in the 80’s my brother got a 7600 in 308 Win for $385 at the local hardware store. Man times have changed.

Sure smells like a scam

35 Whelen will do what you want. A 375 H&H would also be a good choice.

There are a few on GB , but pricey https://www.gunbroker.com/all/search?keywords=remington%207600&pagesize=24&sort=13&view=1&ch-caliber=.35%20WHELEN

I’ve been toying with the rebarelling of my 458 WM. My thoughts were going to a short (18”) barrel and subsonic for my narrow woods stand. First my bullets never shipped from American Reloading , eventually fully refunded. Then my Trail Boss powder from Sportsman Warehouse got lost , again...

0.003” on the bolt face is fine. I think 0.023” on the rails should work.

Gone now